Ohmcraft

Ohmcraft

High performance, høj spænding og høj ohm tykfilm modstande

  • Ny Ohmcraft’s UHVC chipmodstand’s serie tilbyder nu den højeste spænding som er tilgængelig i verden
  • SMD og leaded, høj spænding, høj ohm modstands pakninger er tilgængelig i forekellige optioner
  • Ohmcraft benytter sig af Micropenning© for at kunne tilbyde de mest stabile og præcise modstande i branchen
  • Kundespecificeret modstande, netværk og delere er tilgængelig, såvel som militær klassificerede modstande

Klik her for deres officielle hjemmeside

Show:
Sort By:

Ohmcraft CN Series

The CN custom through-hole resistor network series from Ohmcraft® provides a fully customisable solution for your resistor network needs. The CN series offers ohmic values up to 2GΩ, very low noise, ultra-high stability including tight ratio tolerances to ±0.1%, low absolute TCR to ±10 ppm/°C with a tracking TCR down to ±5 ppm/°C and a low VCR to 0.05 ppm/V. By utilising their patented Micropen® precision printing technology, FineFilm, Ohmcraft are able to provide an entirely new level of performance and stability in custom leaded resistor networks.

  • Custom radial leaded through-hole resistor network
  • Available with ohmic values up to 2GΩ
  • Utilises patented Micropen® precision printing technology
  • Ultra-high stability
  • Very low noise
  • Tight ratio tolerances to ±0.1%
  • Low TCR to ±10 ppm/°C
  • Low TCR tracking to ±5 ppm/°C
  • Low VCR to 0.05 ppm/V

Due to the endless possibilities with the Ohmcraft CN custom resistor network series, each requirement will be individually reviewed and a part number allocated upon approval. Please include the following information for any requirement:

  • A schematic and physical diagram showing how all of the resistors interconnect
  • The value of each resistor
  • The desired TCR value (ppm/°C)
  • Overall tolerance and the tolerances for each individual component value
  • Type and length of leads
  • Any other information necessary to the manufacture of the network

£0.00 Ex Tax: £0.00

Ohmcraft HC0202 Series

The HC0202 high ohmic bondable chip resistor series from Ohmcraft® offers a resistance range from 1kΩ up to 500MΩ all in very small 0202 chip size package. By utilising their patented Micropen® precision printing technology, they are able to provide an entirely new level of performance and stability in thick-film surface-mount resistors. HC0202 resistors offer very low noise, ultra-high stability with tolerances down to ±0.5%, TCR as low as ±25 ppm/°C and VCR down to 1 ppm/V.

  • 2-terminal high ohmic, bondable, surface-mount resistor
  • Available in any resistance between 1kΩ and 500MΩ
  • Utilises patented Micropen® precision printing technology
  • Ultra-high stability
  • Very low noise
  • 0202 chip size
  • Tolerances as low as ±0.5%
  • TCR as low as ±25 ppm/°C (from +25°C up to +75°C)
  • Maximum voltage rating of 50V
  • Maximum power rating of 0.04W

Ohmcraft's HC0202 high ohmic surface-mount resistors are available with wire-bondable Gold (Au) terminations.

Standard case sizes for the HC series are 0202, 0303, 0403, 0404, 0502 and 0505, with custom case sizes available.

For custom configurations or requirements, please contact us.

The below table gives the available specifications for the HC series including the HC0202:

Ohmcraft HC Specifications

1Other custom case sizes are available.
2The continuous maximum voltage applied cannot exceed the maximum power rating.

£0.00 Ex Tax: £0.00

Ohmcraft HC0303 Series

The HC0303 high ohmic bondable chip resistor series from Ohmcraft® offers a resistance range from 1kΩ up to 10GΩ all in very small 0303 chip size package. By utilising their patented Micropen® precision printing technology, they are able to provide an entirely new level of performance and stability in thick-film surface-mount resistors. HC0303 resistors offer very low noise, ultra-high stability with tolerances down to ±0.5%, TCR as low as ±25 ppm/°C and VCR down to 1 ppm/V.

  • 2-terminal high ohmic, bondable, surface-mount resistor
  • Available in any resistance between 1kΩ and 10GΩ
  • Utilises patented Micropen® precision printing technology
  • Ultra-high stability
  • Very low noise
  • 0303 chip size
  • Tolerances as low as ±0.5%
  • TCR as low as ±25 ppm/°C (from +25°C up to +75°C)
  • Maximum voltage rating of 50V
  • Maximum power rating of 0.05W

Ohmcraft's HC0303 high ohmic surface-mount resistors are available with wire-bondable Gold (Au) terminations.

Standard case sizes for the HC series are 0202, 0303, 0403, 0404, 0502 and 0505, with custom case sizes available.

For custom configurations or requirements, please contact us.

The below table gives the available specifications for the HC series including the HC0303:

Ohmcraft HC Specifications

1Other custom case sizes are available.
2The continuous maximum voltage applied cannot exceed the maximum power rating.

£0.00 Ex Tax: £0.00

Ohmcraft HC0403 Series

The HC0403 high ohmic bondable chip resistor series from Ohmcraft® offers a resistance range from 1kΩ up to 50GΩ all in very small 0403 chip size package. By utilising their patented Micropen® precision printing technology, they are able to provide an entirely new level of performance and stability in thick-film surface-mount resistors. HC0403 resistors offer very low noise, ultra-high stability with tolerances down to ±0.5%, TCR as low as ±25 ppm/°C and VCR down to 1 ppm/V.

  • 2-terminal high ohmic, bondable, surface-mount resistor
  • Available in any resistance between 1kΩ and 50GΩ
  • Utilises patented Micropen® precision printing technology
  • Ultra-high stability
  • Very low noise
  • 0403 chip size
  • Tolerances as low as ±0.5%
  • TCR as low as ±25 ppm/°C (from +25°C up to +75°C)
  • Maximum voltage rating of 100V
  • Maximum power rating of 0.055W

Ohmcraft's HC0403 high ohmic surface-mount resistors are available with wire-bondable Gold (Au) terminations.

Standard case sizes for the HC series are 0202, 0303, 0403, 0404, 0502 and 0505, with custom case sizes available.

For custom configurations or requirements, please contact us.

The below table gives the available specifications for the HC series including the HC0403:

Ohmcraft HC Specifications

1Other custom case sizes are available.
2The continuous maximum voltage applied cannot exceed the maximum power rating.

£0.00 Ex Tax: £0.00

Ohmcraft HC0404 Series

The HC0404 high ohmic bondable chip resistor series from Ohmcraft® offers a resistance range from 1kΩ up to 50GΩ all in very small 0404 chip size package. By utilising their patented Micropen® precision printing technology, they are able to provide an entirely new level of performance and stability in thick-film surface-mount resistors. HC0404 resistors offer very low noise, ultra-high stability with tolerances down to ±0.5%, TCR as low as ±25 ppm/°C and VCR down to 1 ppm/V.

  • 2-terminal high ohmic, bondable, surface-mount resistor
  • Available in any resistance between 1kΩ and 50GΩ
  • Utilises patented Micropen® precision printing technology
  • Ultra-high stability
  • Very low noise
  • 0404 chip size
  • Tolerances as low as ±0.5%
  • TCR as low as ±25 ppm/°C (from +25°C up to +75°C)
  • Maximum voltage rating of 100V
  • Maximum power rating of 0.06W

Ohmcraft's HC0404 high ohmic surface-mount resistors are available with wire-bondable Gold (Au) terminations.

Standard case sizes for the HC series are 0202, 0303, 0403, 0404, 0502 and 0505, with custom case sizes available.

For custom configurations or requirements, please contact us.

The below table gives the available specifications for the HC series including the HC0404:

Ohmcraft HC Specifications

1Other custom case sizes are available.
2The continuous maximum voltage applied cannot exceed the maximum power rating.

£0.00 Ex Tax: £0.00

Ohmcraft HC0502 Series

The HC0502 high ohmic bondable chip resistor series from Ohmcraft® offers a resistance range from 1kΩ up to 10GΩ all in very small 0502 chip size package. By utilising their patented Micropen® precision printing technology, they are able to provide an entirely new level of performance and stability in thick-film surface-mount resistors. HC0502 resistors offer very low noise, ultra-high stability with tolerances down to ±0.5%, TCR as low as ±25 ppm/°C and VCR down to 1 ppm/V.

  • 2-terminal high ohmic, bondable, surface-mount resistor
  • Available in any resistance between 1kΩ and 10GΩ
  • Utilises patented Micropen® precision printing technology
  • Ultra-high stability
  • Very low noise
  • 0502 chip size
  • Tolerances as low as ±0.5%
  • TCR as low as ±25 ppm/°C (from +25°C up to +75°C)
  • Maximum voltage rating of 100V
  • Maximum power rating of 0.05W

Ohmcraft's HC0502 high ohmic surface-mount resistors are available with wire-bondable Gold (Au) terminations.

Standard case sizes for the HC series are 0202, 0303, 0403, 0404, 0502 and 0505, with custom case sizes available.

For custom configurations or requirements, please contact us.

The below table gives the available specifications for the HC series including the HC0502:

Ohmcraft HC Specifications

1Other custom case sizes are available.
2The continuous maximum voltage applied cannot exceed the maximum power rating.

£0.00 Ex Tax: £0.00

Ohmcraft HC0505 Series

The HC0505 high ohmic bondable chip resistor series from Ohmcraft® offers a resistance range from 1kΩ up to 50GΩ all in very small 0505 chip size package. By utilising their patented Micropen® precision printing technology, they are able to provide an entirely new level of performance and stability in thick-film surface-mount resistors. HC0505 resistors offer very low noise, ultra-high stability with tolerances down to ±0.5%, TCR as low as ±25 ppm/°C and VCR down to 1 ppm/V.

  • 2-terminal high ohmic, bondable, surface-mount resistor
  • Available in any resistance between 1kΩ and 50GΩ
  • Utilises patented Micropen® precision printing technology
  • Ultra-high stability
  • Very low noise
  • 0505 chip size
  • Tolerances as low as ±0.5%
  • TCR as low as ±25 ppm/°C (from +25°C up to +75°C)
  • Maximum voltage rating of 100V
  • Maximum power rating of 0.1W

Ohmcraft's HC0505 high ohmic surface-mount resistors are available with wire-bondable Gold (Au) terminations.

Standard case sizes for the HC series are 0202, 0303, 0403, 0404, 0502 and 0505, with custom case sizes available.

For custom configurations or requirements, please contact us.

The below table gives the available specifications for the HC series including the HC0505:

Ohmcraft HC Specifications

1Other custom case sizes are available.
2The continuous maximum voltage applied cannot exceed the maximum power rating.

£0.00 Ex Tax: £0.00

Ohmcraft HVA05 Series

The HVA05 precision high voltage axial resistor series from Ohmcraft® offers a voltage rating of 5kV, power rating of 1W and a resistance range from 500kΩ up to 500MΩ all in a cylindrical axial leaded through-hole package. By utilising their patented Micropen® precision printing technology, they are able to provide a superior precision, non-inductive thick-film resistor. HVA resistors offer very low noise, ultra-high stability with tolerances down to ±0.1% (500kΩ to 100MΩ), TCR as low as ±50 ppm/°C and VCR down to 0.1 ppm/V.

  • Cylindrical high voltage axial leaded resistor
  • Available in any resistance between 500kΩ and 500MΩ
  • Utilises patented Micropen® precision printing technology
  • Ultra-high stability
  • Very low noise
  • Non-inductive
  • Tolerances as low as ±0.1% (between 500kΩ and 100MΩ)
  • TCR as low as ±50 ppm/°C (from +25°C up to +75°C)
  • VCR as low as ±0.1 ppm/V
  • Maximum voltage rating of 5kV
  • Maximum power rating of 1W
  • Operating temperature from -55°C up to +225°C
  • Custom configurations and sizes available upon request

Ohmcraft's HVA05 high voltage axial leaded through-hole resistor series offers a body length of 14.27mm (±0.76mm) and a diameter of 4.57mm (±0.38mm). The lead length is 38.1mm (±3.18mm) with a diameter of 0.64mm (±0.05mm).

The HVA series is produced using an Alumina substrate, coated in high-temperature silicone conformal and fitted with stainless steel end caps. The leads are solderable Gold and Nickel plated copper (RoHS compliant).

For custom configurations or requirements, please contact us.

The below table gives the specifications available for the complete HVA series including the HVA05:

Ohmcraft HVA Specifications

The continuous maximum applied voltage cannot exceed the maximum power rating and is ohmic value dependent.
Value range is case size dependent.

£0.00 Ex Tax: £0.00

Ohmcraft HVA10 Series

The HVA10 precision high voltage axial resistor series from Ohmcraft® offers a voltage rating of 15kV, power rating of 2W and a resistance range from 500kΩ up to 2GΩ all in a cylindrical axial leaded through-hole package. By utilising their patented Micropen® precision printing technology, they are able to provide a superior precision, non-inductive thick-film resistor. HVA resistors offer very low noise, ultra-high stability with tolerances down to ±0.1% (500kΩ to 100MΩ), TCR as low as ±50 ppm/°C and VCR down to 0.1 ppm/V.

  • Cylindrical high voltage axial leaded resistor
  • Available in any resistance between 500kΩ and 2GΩ
  • Utilises patented Micropen® precision printing technology
  • Ultra-high stability
  • Very low noise
  • Non-inductive
  • Tolerances as low as ±0.1% (between 500kΩ and 100MΩ)
  • TCR as low as ±50 ppm/°C (from +25°C up to +75°C)
  • VCR as low as ±0.1 ppm/V
  • Maximum voltage rating of 15kV
  • Maximum power rating of 2W
  • Operating temperature from -55°C up to +225°C
  • Custom configurations and sizes available upon request

Ohmcraft's HVA10 high voltage axial leaded through-hole resistor series offers a body length of 38.1mm (±0.76mm) and a diameter of 4.57mm (±0.38mm). The lead length is 38.1mm (±3.18mm) with a diameter of 0.64mm (±0.05mm).

The HVA series is produced using an Alumina substrate, coated in high-temperature silicone conformal and fitted with stainless steel end caps. The leads are solderable Gold and Nickel plated copper (RoHS compliant).

For custom configurations or requirements, please contact us.

The below table gives the specifications available for the complete HVA series including the HVA10:

Ohmcraft HVA Specifications

The continuous maximum applied voltage cannot exceed the maximum power rating and is ohmic value dependent.
Value range is case size dependent.

£0.00 Ex Tax: £0.00

Ohmcraft HVA18 Series

The HVA18 precision high voltage axial resistor series from Ohmcraft® offers a voltage rating of 15kV, power rating of 3.6W and a resistance range from 500kΩ up to 2GΩ all in a cylindrical axial leaded through-hole package. By utilising their patented Micropen® precision printing technology, they are able to provide a superior precision, non-inductive thick-film resistor. HVA resistors offer very low noise, ultra-high stability with tolerances down to ±0.1% (500kΩ to 100MΩ), TCR as low as ±50 ppm/°C and VCR down to 0.1 ppm/V.

  • Cylindrical high voltage axial leaded resistor
  • Available in any resistance between 500kΩ and 2GΩ
  • Utilises patented Micropen® precision printing technology
  • Ultra-high stability
  • Very low noise
  • Non-inductive
  • Tolerances as low as ±0.1% (between 500kΩ and 100MΩ)
  • TCR as low as ±50 ppm/°C (from +25°C up to +75°C)
  • VCR as low as ±0.1 ppm/V
  • Maximum voltage rating of 15kV
  • Maximum power rating of 3.6W
  • Operating temperature from -55°C up to +225°C
  • Custom configurations and sizes available upon request

Ohmcraft's HVA18 high voltage axial leaded through-hole resistor series offers a body length of 38.1mm (±0.76mm) and a diameter of 7.87mm (±0.38mm). The lead length is 38.1mm (±3.18mm) with a diameter of 1.02mm (±0.05mm).

The HVA series is produced using an Alumina substrate, coated in high-temperature silicone conformal and fitted with stainless steel end caps. The leads are solderable Gold and Nickel plated copper (RoHS compliant).

For custom configurations or requirements, please contact us.

The below table gives the specifications available for the complete HVA series including the HVA18:

Ohmcraft HVA Specifications

The continuous maximum applied voltage cannot exceed the maximum power rating and is ohmic value dependent.
Value range is case size dependent.

£0.00 Ex Tax: £0.00

Ohmcraft HVA25 Series

The HVA25 precision high voltage axial resistor series from Ohmcraft® offers a voltage rating of 20kV, power rating of 5W and a resistance range from 500kΩ up to 4GΩ all in a cylindrical axial leaded through-hole package. By utilising their patented Micropen® precision printing technology, they are able to provide a superior precision, non-inductive thick-film resistor. HVA resistors offer very low noise, ultra-high stability with tolerances down to ±0.1% (500kΩ to 100MΩ), TCR as low as ±50 ppm/°C and VCR down to 0.1 ppm/V.

  • Cylindrical high voltage axial leaded resistor
  • Available in any resistance between 500kΩ and 4GΩ
  • Utilises patented Micropen® precision printing technology
  • Ultra-high stability
  • Very low noise
  • Non-inductive
  • Tolerances as low as ±0.1% (between 500kΩ and 100MΩ)
  • TCR as low as ±50 ppm/°C (from +25°C up to +75°C)
  • VCR as low as ±0.1 ppm/V
  • Maximum voltage rating of 20kV
  • Maximum power rating of 5W
  • Operating temperature from -55°C up to +225°C
  • Custom configurations and sizes available upon request

Ohmcraft's HVA25 high voltage axial leaded through-hole resistor series offers a body length of 53.98mm (±0.76mm) and a diameter of 7.87mm (±0.38mm). The lead length is 38.1mm (±3.18mm) with a diameter of 1.02mm (±0.05mm).

The HVA series is produced using an Alumina substrate, coated in high-temperature silicone conformal and fitted with stainless steel end caps. The leads are solderable Gold and Nickel plated copper (RoHS compliant).

For custom configurations or requirements, please contact us.

The below table gives the specifications available for the complete HVA series including the HVA25:

Ohmcraft HVA Specifications

The continuous maximum applied voltage cannot exceed the maximum power rating and is ohmic value dependent.
Value range is case size dependent.

£0.00 Ex Tax: £0.00

Ohmcraft HVA38 Series

The HVA38 precision high voltage axial resistor series from Ohmcraft® offers a voltage rating of 30kV, power rating of 7.5W and a resistance range from 500kΩ up to 6GΩ all in a cylindrical axial leaded through-hole package. By utilising their patented Micropen® precision printing technology, they are able to provide a superior precision, non-inductive thick-film resistor. HVA resistors offer very low noise, ultra-high stability with tolerances down to ±0.1% (500kΩ to 100MΩ), TCR as low as ±50 ppm/°C and VCR down to 0.1 ppm/V.

  • Cylindrical high voltage axial leaded resistor
  • Available in any resistance between 500kΩ and 6GΩ
  • Utilises patented Micropen® precision printing technology
  • Ultra-high stability
  • Very low noise
  • Non-inductive
  • Tolerances as low as ±0.1% (between 500kΩ and 100MΩ)
  • TCR as low as ±50 ppm/°C (from +25°C up to +75°C)
  • VCR as low as ±0.1 ppm/V
  • Maximum voltage rating of 30kV
  • Maximum power rating of 7.5W
  • Operating temperature from -55°C up to +225°C
  • Custom configurations and sizes available upon request

Ohmcraft's HVA38 high voltage axial leaded through-hole resistor series offers a body length of 79.38mm (±0.76mm) and a diameter of 7.87mm (±0.38mm). The lead length is 38.1mm (±3.18mm) with a diameter of 1.02mm (±0.05mm).

The HVA series is produced using an Alumina substrate, coated in high-temperature silicone conformal and fitted with stainless steel end caps. The leads are solderable Gold and Nickel plated copper (RoHS compliant).

For custom configurations or requirements, please contact us.

The below table gives the specifications available for the complete HVA series including the HVA38:

Ohmcraft HVA Specifications

The continuous maximum applied voltage cannot exceed the maximum power rating and is ohmic value dependent.
Value range is case size dependent.

£0.00 Ex Tax: £0.00

Ohmcraft HVA50 Series

The HVA50 precision high voltage axial resistor series from Ohmcraft® offers a voltage rating of 50kV, power rating of 10W and a resistance range from 500kΩ up to 10GΩ all in a cylindrical axial leaded through-hole package. By utilising their patented Micropen® precision printing technology, they are able to provide a superior precision, non-inductive thick-film resistor. HVA resistors offer very low noise, ultra-high stability with tolerances down to ±0.1% (500kΩ to 100MΩ), TCR as low as ±50 ppm/°C and VCR down to 0.1 ppm/V.

  • Cylindrical high voltage axial leaded resistor
  • Available in any resistance between 500kΩ and 10GΩ
  • Utilises patented Micropen® precision printing technology
  • Ultra-high stability
  • Very low noise
  • Non-inductive
  • Tolerances as low as ±0.1% (between 500kΩ and 100MΩ)
  • TCR as low as ±50 ppm/°C (from +25°C up to +75°C)
  • VCR as low as ±0.1 ppm/V
  • Maximum voltage rating of 50kV
  • Maximum power rating of 10W
  • Operating temperature from -55°C up to +225°C
  • Custom configurations and sizes available upon request

Ohmcraft's HVA50 high voltage axial leaded through-hole resistor series offers a body length of 127.38mm (±0.76mm) and a diameter of 7.87mm (±0.38mm). The lead length is 38.1mm (±3.18mm) with a diameter of 1.02mm (±0.05mm).

The HVA series is produced using an Alumina substrate, coated in high-temperature silicone conformal and fitted with stainless steel end caps. The leads are solderable Gold and Nickel plated copper (RoHS compliant).

For custom configurations or requirements, please contact us.

The below table gives the specifications available for the complete HVA series including the HVA50:

Ohmcraft HVA Specifications

The continuous maximum applied voltage cannot exceed the maximum power rating and is ohmic value dependent.
Value range is case size dependent.

£0.00 Ex Tax: £0.00

Ohmcraft HVC0402 Series

The HVC0402 high voltage chip resistor series from Ohmcraft® offers a voltage rating of 150V, power rating of 0.04W and a resistance range from 10kΩ up to 1GΩ all in a 0402 chip size package. By utilising their patented Micropen® precision printing technology, they are able to provide a superior precision, thick-film surface-mount resistor. The HVC0402 resistors series offers very low noise, ultra-high stability with tolerances down to ±1% (between 10kΩ and 500MΩ), TCR as low as ±50 ppm/°C (between 10kΩ and 100MΩ) and VCR down to 1 ppm/V.

  • 2-terminal high voltage surface-mount resistor
  • Available in any resistance between 10kΩ and 1GΩ
  • Utilises patented Micropen® precision printing technology
  • Ultra-high stability
  • Very low noise
  • 0402 chip size
  • Tolerances as low as ±1% (between 10kΩ and 500MΩ)
  • TCR as low as ±50 ppm/°C (from +25°C up to +75°C, between 10kΩ and 100MΩ)
  • Maximum voltage rating of 150V
  • Maximum power rating of 0.04W
  • Working temperature from -55°C up to +150°C

Ohmcraft's HVC0402 ultra-high voltage surface-mount resistors are available with various terminations:

  • T - Solderable wraparound matte Tin (Sn99.9) on Nickel barrier (RoHS Compliant)
  • B - Solderable wraparound Tin Lead (Sn63Pb37) solder over Nickel barrier (Not RoHS Compliant)
  • Z - Solderable single surface Tin (Sn99.9) on Nickel barrier (RoHS Compliant)
  • S - Solderable single surface Tin Lead (Sn63Pb37) flip-chip (Not RoHS Compliant)
  • G - Wire-bondable Gold (Au) (RoHS Compliant)

Please see the HVC series datasheet under the Technical Library tab for other available chip sizes and standard products.

For custom configurations or requirements, please contact us.

The below table gives the available specifications for the HVC0402 series:

Ohmcraft HVC0402 Specifications

The continuous maximum applied voltage cannot exceed the maximum power rating and is ohmic value dependent.
Value range is case size dependent.

£0.00 Ex Tax: £0.00

Ohmcraft HVC0603 Series

The HVC0603 high voltage chip resistor series from Ohmcraft® offers a voltage rating of 400V, power rating of 0.06W and a resistance range from 10kΩ up to 50GΩ all in a 0603 chip size package. By utilising their patented Micropen® precision printing technology, they are able to provide a superior precision, thick-film surface-mount resistor. The HVC0603 resistors series offers very low noise, ultra-high stability with tolerances down to ±0.5% (between 10kΩ and 10MΩ), TCR as low as ±50 ppm/°C (between 10kΩ and 500MΩ) and VCR down to 1 ppm/V.

  • 2-terminal high voltage surface-mount resistor
  • Available in any resistance between 10kΩ and 50GΩ
  • Utilises patented Micropen® precision printing technology
  • Ultra-high stability
  • Very low noise
  • 0603 chip size
  • Tolerances as low as ±0.5% (between 10kΩ and 10MΩ)
  • TCR as low as ±50 ppm/°C (from +25°C up to +75°C, between 10kΩ and 500MΩ)
  • Maximum voltage rating of 400V
  • Maximum power rating of 0.06W
  • Working temperature from -55°C up to +150°C

Ohmcraft's HVC0603 ultra-high voltage surface-mount resistors are available with various terminations:

  • T - Solderable wraparound matte Tin (Sn99.9) on Nickel barrier (RoHS Compliant)
  • B - Solderable wraparound Tin Lead (Sn63Pb37) solder over Nickel barrier (Not RoHS Compliant)
  • Z - Solderable single surface Tin (Sn99.9) on Nickel barrier (RoHS Compliant)
  • S - Solderable single surface Tin Lead (Sn63Pb37) flip-chip (Not RoHS Compliant)
  • G - Wire-bondable Gold (Au) (RoHS Compliant)

Please see the HVC series datasheet under the Technical Library tab for other available chip sizes and standard products.

For custom configurations or requirements, please contact us.

The below table gives the available specifications for the HVC0603 series:

Ohmcraft HVC0603 Specifications

The continuous maximum applied voltage cannot exceed the maximum power rating and is ohmic value dependent.
Value range is case size dependent.

£0.00 Ex Tax: £0.00