Print Terminaler

Print Terminaler

PCB terminals are universal, direct PCB connector for industrial electronics.

  • Application-oriented connection technology from clamping-yoke screw connections to PUSH IN spring stop mechanism in all the relevant cross-sectional areas
  • Can be used universally in all standard pitches from 3.50mm
  • A wide range of reflow compatible products for automated SMT processes
  • Compact, multi-layer designs up to 72 pole
Show:
Sort By:

Weidmüller LM 3.50/90 Series

The LM 3.50/90 PCB terminal series from Weidmüller's Omnimate signal range, offers a clamping yoke screw connection. Designed with a conductor outlet direction of 90° and a choice from 2 up to 12 poles and a 3.5mm pitch. The LM 3.50/90 series from Weidmüller have a fully automatic assembly using wave soldering and can be used with or without ferrules, with an operating temperature range of −50°C to +120°C .

  • PCB terminal connector
  • Through-hole technology with wave soldering
  • Number of poles available from 2 to 12
  • Solder pin length of 3.2mm
  • Pitch of 3.5mm
  • Conductor outlet direction of 90°
  • Wire connection cross section from AWG 28 to AWG 14
  • CSA and UL 1059 approved, IEC listed
  • Dimmensions for L1 from 3.5mm to 5mm depending on the number of poles required
  • Rated current for minimum number of poles 16A (IEC) and 10A (UL)
  • Orange in colour
  • Packaged in Boxes
  • Operating temperature range −50°C to +120°C

The below table gives the specifications of the Weidmüller LM 3.50/90 PCB terminal series:

Weidmüller LM 3.50/90_3.2SN OR BX Specifications Please see the relevant datasheet in the technical library for the exact specification

£0.00 Ex Tax: £0.00

Weidmüller LM 5.08/90 Series

The LM 5.08/90 PCB terminal series from Weidmüller's Omnimate signal range, offers a clamping yoke screw connection. Designed with a conductor outlet direction of 90° and a choice from 2 up to 24 poles and a 5.08mm pitch. The LM 5.08/90 series from Weidmüller have a fully automatic assembly using wave soldering and can be used with or without ferrules, with an operating temperature range of −50°C to +120°C .

  • PCB terminal connector
  • Through-hole technology with wave soldering
  • Number of poles available from 2 to 24
  • Solder pin length of 3.5mm
  • Pitch of 5.08mm
  • Conductor outlet direction of 90°
  • Wire connection cross section from AWG 24 to AWG 14
  • CSA and UL 1059 approved, IEC listed
  • Dimmensions for L1 from 5.08mm to 119.84mm depending on the number of poles required
  • Rated current for minimum number of poles 17.5A (IEC) and 15A (UL)
  • Orange in colour
  • Packaged in Boxes
  • Operating temperature range −50°C to +120°C

The below table gives the specifications of the Weidmüller LM 5.08/90 PCB terminal series:

Weidmüller LM 5.08/90_3.5SN OR BX Specifications Please see the relevant datasheet in the technical library for the exact specification

£0.00 Ex Tax: £0.00

Weidmüller LSF-SMD 3.50/180 Series

The LSF-SMD 3.50/180 PCB terminal series from Weidmüller's Omnimate signal range, offers a spring connection with direct push in technology. Designed with a conductor outlet direction of 180°, and a choice from 2 up to 12 poles and a 3.5mm pitch. The LSF-SMD 3.50/180 series from Weidmüller have a fully automatic assembly using reflow soldering (SMD) and can be used with or without ferrules, with an operating temperature range of −50°C to +120°C .

  • PCB terminal connector
  • Mounting onto PCB with reflow soldering
  • Number of poles available from 2 to 12
  • Pitch of 3.5mm
  • Conductor outlet direction of 180°
  • Wire connection cross section from AWG 28 to AWG 14
  • CSA and UL 1059 approved, IEC listed
  • Dimmensions for L1 from 3.5mm to 38.5mm depending on the number of poles required
  • Rated current for minimum number of poles 17.5A (IEC) and 12A (UL)
  • Packaged in tape on reel
  • Operating temperature range −50°C to +120°C

The below table gives the specifications of the Weidmüller LSF-SMD 3.50/180 PCB terminal series:

Weidmüller LSF-SMD 3.50/180 Specifications Please see the relevant datasheet in the technical library for the exact specification

£0.00 Ex Tax: £0.00

Weidmüller LSF-SMD 3.50/90 Series

The LSF-SMD 3.50/90 PCB terminal series from Weidmüller's Omnimate signal range, offers a spring connection with direct push in technology. Designed with a conductor outlet direction of 90°, and a choice from 2 up to 12 poles and a 3.5mm pitch. The LSF-SMD 3.50/90 series from Weidmüller have a fully automatic assembly using reflow soldering (SMD) and can be used with or without ferrules, with an operating temperature range of −50°C to +120°C .

  • PCB terminal connector
  • Mounting onto PCB with reflow soldering
  • Number of poles available from 2 to 12
  • Pitch of 3.5mm
  • Conductor outlet direction of 90°
  • Wire connection cross section from AWG 28 to AWG 14
  • CSA and UL 1059 approved, IEC listed
  • Dimmensions for L1 from 3.5mm to 38.5mm depending on the number of poles required
  • Rated current for minimum number of poles 17.5A (IEC) and 12A (UL)
  • Packaged in tape on reel
  • Operating temperature range −50°C to +120°C

The below table gives the specifications of the Weidmüller LSF-SMD 3.50/90 PCB terminal series:

Weidmüller LSF-SMD 3.50/90 Specifications Please see the relevant datasheet in the technical library for the exact specification

£0.00 Ex Tax: £0.00

Weidmüller LSF-SMD 5.00/180 Series

The LSF-SMD 5.00/180 PCB terminal series from Weidmüller's Omnimate signal range, offers a spring connection with direct push in technology. Designed with a conductor outlet direction of 180°, and a choice from 2 up to 12 poles and a 5mm pitch. The LSF-SMD 5.00/180 series from Weidmüller have a fully automatic assembly using reflow soldering (SMD) and can be used with or without ferrules, with an operating temperature range of −50°C to +120°C .

  • PCB terminal connector
  • Mounting onto PCB with reflow soldering
  • Number of poles available from 2 to 8
  • Pitch of 5mm
  • Conductor outlet direction of 180°
  • Wire connection cross section from AWG 28 to AWG 14
  • CSA and UL 1059 approved, IEC listed
  • Dimmensions for L1 from 5mm to 35mm depending on the number of poles required
  • Rated current for minimum number of poles 17.5A (IEC) and 12A (UL)
  • Packaged in tape on reel
  • Operating temperature range −50°C to +120°C

The below table gives the specifications of the Weidmüller LSF-SMD 5.00/180 PCB terminal series:

Weidmüller LSF-SMD 5.00/180 Specifications Please see the relevant datasheet in the technical library for the exact specification

£0.00 Ex Tax: £0.00

Weidmüller LSF-SMD 5.00/90 Series

The LSF-SMD 5.00/90 PCB terminal series from Weidmüller's Omnimate signal range, offers a spring connection with direct push in technology. Designed with a conductor outlet direction of 90°, and a choice from 2 up to 8 poles and a 5mm pitch. The LSF-SMD 5.00/90 series from Weidmüller have a fully automatic assembly using reflow soldering (SMD) and can be used with or without ferrules, with an operating temperature range of −50°C to +120°C .

  • PCB terminal connector
  • Mounting onto PCB with reflow soldering
  • Number of poles available from 2 to 8
  • Pitch of 5mm
  • Conductor outlet direction of 90°
  • Wire connection cross section from AWG 28 to AWG 14
  • CSA and UL 1059 approved, IEC listed
  • Dimmensions for L1 from 5mm to 35mm depending on the number of poles required
  • Rated current for minimum number of poles 17.5A (IEC) and 12A (UL)
  • Packaged in tape on reel
  • Operating temperature range −50°C to +120°C

The below table gives the specifications of the Weidmüller LSF-SMD 3.50/90 PCB terminal series:

Weidmüller LSF-SMD 5.00/90 Specifications Please see the relevant datasheet in the technical library for the exact specification

£0.00 Ex Tax: £0.00

Weidmüller LSF-SMD 7.50/180 Series

The LSF-SMD 7.50/180 PCB terminal series from Weidmüller's Omnimate signal range, offers a spring connection with direct push in technology. Designed with a conductor outlet direction of 180°, and a choice from 2 up to 12 poles and a 7.5mm pitch. The LSF-SMD 7.50/180 series from Weidmüller have a fully automatic assembly using reflow soldering (SMD) and can be used with or without ferrules, with an operating temperature range of −50°C to +120°C .

  • PCB terminal connector
  • Mounting onto PCB with reflow soldering
  • Number of poles available from 2 to 6
  • Pitch of 7.5mm
  • Conductor outlet direction of 180°
  • Wire connection cross section from AWG 28 to AWG 14
  • CSA and UL 1059 approved, IEC listed
  • Dimmensions for L1 from 7.5mm to 37.5mm depending on the number of poles required
  • Rated current for minimum number of poles 17.5A (IEC) and 12A (UL)
  • Packaged in tape on reel
  • Operating temperature range −50°C to +120°C

The below table gives the specifications of the Weidmüller LSF-SMD 7.50/180 PCB terminal series:

Weidmüller LSF-SMD 7.50/180 Specifications Please see the relevant datasheet in the technical library for the exact specification

£0.00 Ex Tax: £0.00

Weidmüller LSF-SMD 7.50/90 Series

The LSF-SMD 7.50/90 PCB terminal series from Weidmüller's Omnimate signal range, offers a spring connection with direct push in technology. Designed with a conductor outlet direction of 90°, and a choice from 2 up to 6 poles and a 7.5mm pitch. The LSF-SMD 3.50/90 series from Weidmüller have a fully automatic assembly using reflow soldering (SMD) and can be used with or without ferrules, with an operating temperature range of −50°C to +120°C .

  • PCB terminal connector
  • Mounting onto PCB with reflow soldering
  • Number of poles available from 2 to 6
  • Pitch of 7.5mm
  • Conductor outlet direction of 90°
  • Wire connection cross section from AWG 28 to AWG 14
  • CSA and UL 1059 approved, IEC listed
  • Dimmensions for L1 from 7.5mm to 37.5mm depending on the number of poles required
  • Rated current for minimum number of poles 17.5A (IEC) and 12A (UL)
  • Packaged in tape on reel
  • Operating temperature range −50°C to +120°C

The below table gives the specifications of the Weidmüller LSF-SMD 7.50/90 PCB terminal series:

Weidmüller LSF-SMD 7.50/90 Specifications Please see the relevant datasheet in the technical library for the exact specification

£0.00 Ex Tax: £0.00

Weidmüller LSF-SMT 3.50/180 Series

The LSF-SMT 3.50/180 PCB terminal series from Weidmüller's Omnimate signal range, offers a spring connection with direct push in technology. Designed with a conductor outlet direction of 180°, and a choice from 2 up to 24 poles and a 3.5mm pitch. The LSF-SMT 3.50/180 series from Weidmüller have a fully automatic assembly using reflow soldering (SMT) and can be used with or without ferrules, with an operating temperature range of −50°C to +120°C .

  • PCB terminal connector
  • Through-hole technology with reflow soldering
  • Number of poles available from 2 to 24
  • Solder pin length of 3.5mm
  • Pitch of 3.5mm
  • Conductor outlet direction of 180°
  • Wire connection cross section from AWG 28 to AWG 14
  • CSA and UL 1059 approved, IEC listed
  • Dimmensions for L1 from 3.5mm to 80.5mm depending on the number of poles required
  • Rated current for minimum number of poles 17.5A (IEC) and 12A (UL)
  • Packaged in tubes
  • Operating temperature range −50°C to +120°C

The below table gives the specifications of the Weidmüller LSF-SMT 3.50/180 PCB terminal series:

Weidmüller LSF-SMT 3.50/180 Specifications Please see the relevant datasheet in the technical library for the exact specification

£0.00 Ex Tax: £0.00

Weidmüller LSF-SMT 3.50/90 Series

The LSF-SMT 3.50/90 PCB terminal series from Weidmüller's Omnimate signal range, offers a spring connection with direct push in technology. Designed with a conductor outlet direction of 90°, and a choice from 2 up to 24 poles and a 3.5mm pitch. The LSF-SMT 3.50/90 series from Weidmüller have a fully automatic assembly using reflow soldering (SMT) and can be used with or without ferrules, with an operating temperature range of −50°C to +120°C .

  • PCB terminal connector
  • Through-hole technology with reflow soldering
  • Number of poles available from 2 to 24
  • Solder pin length of 3.5mm
  • Pitch of 3.5mm
  • Conductor outlet direction of 90°
  • Wire connection cross section from AWG 28 to AWG 14
  • CSA and UL 1059 approved, IEC listed
  • Dimmensions for L1 from 3.5mm to 80.5mm depending on the number of poles required
  • Rated current for minimum number of poles 17.5A (IEC) and 12A (UL)
  • Packaged in tubes
  • Operating temperature range −50°C to +120°C

The below table gives the specifications of the Weidmüller LSF-SMT 3.50/90 PCB terminal series:

Weidmüller LSF-SMT 3.50/90 Specifications Please see the relevant datasheet in the technical library for the exact specification

£0.00 Ex Tax: £0.00

Weidmüller LSF-SMT 5.00/180 Series

The LSF-SMT 5.00/180 PCB terminal series from Weidmüller's Omnimate signal range, offers a spring connection with direct push in technology. Designed with a conductor outlet direction of 180°, and a choice from 2 up to 8 poles and a 5mm pitch. The LSF-SMT 5.00/180 series from Weidmüller have a fully automatic assembly using reflow soldering (SMT) and can be used with or without ferrules, with an operating temperature range of −50°C to +120°C .

  • PCB terminal connector
  • Through-hole technology with reflow soldering
  • Number of poles available from 2 to 8
  • Solder pin length of 3.5mm
  • Pitch of 5mm
  • Conductor outlet direction of 180°
  • Wire connection cross section from AWG 28 to AWG 14
  • CSA and UL 1059 approved, IEC listed
  • Dimmensions for L1 from 5mm to 35mm depending on the number of poles required
  • Rated current for minimum number of poles 17.5A (IEC) and 12A (UL)
  • Packaged in tubes
  • Operating temperature range −50°C to +120°C

The below table gives the specifications of the Weidmüller LSF-SMT 5.00/180 PCB terminal series:

Weidmüller LSF-SMT 5.00/180 Specifications Please see the relevant datasheet in the technical library for the exact specification

£0.00 Ex Tax: £0.00

Weidmüller LSF-SMT 5.00/90 Series

The LSF-SMT 5.00/90 PCB terminal series from Weidmüller's Omnimate signal range, offers a spring connection with direct push in technology. Designed with a conductor outlet direction of 90°, and a choice from 2 up to 8 poles and a 5mm pitch. The LSF-SMT 5.00/90 series from Weidmüller have a fully automatic assembly using reflow soldering (SMT) and can be used with or without ferrules, with an operating temperature range of −50°C to +120°C .

  • PCB terminal connector
  • Through-hole technology with reflow soldering
  • Number of poles available from 2 to 8
  • Solder pin length of 3.5mm
  • Pitch of 5.00mm
  • Conductor outlet direction of 90°
  • Wire connection cross section from AWG 28 to AWG 14
  • CSA and UL 1059 approved, IEC listed
  • Dimmensions for L1 from 5mm to 35mm depending on the number of poles required
  • Rated current for minimum number of poles 17.5A (IEC) and 12A (UL)
  • Packaged in tubes
  • Operating temperature range −50°C to +120°C

The below table gives the specifications of the Weidmüller LSF-SMT 5.00/90 PCB terminal series:

Weidmüller LSF-SMT 5.00/90 Specifications Please see the relevant datasheet in the technical library for the exact specification

£0.00 Ex Tax: £0.00

Weidmüller LSF-SMT 5.08/90 Series

The LSF-SMT 5.08/90 PCB terminal series from Weidmüller's Omnimate signal range, offers a spring connection with direct push in technology. Designed with a conductor outlet direction of 90°, and a choice from 2 up to 8 poles and a 5.08mm pitch. The LSF-SMT 5.08/90 series from Weidmüller have a fully automatic assembly using reflow soldering (SMT) and can be used with or without ferrules, with an operating temperature range of −50°C to +120°C .

  • PCB terminal connector
  • Through-hole technology with reflow soldering
  • Number of poles available from 2 to 8
  • Solder pin length of 3.5mm
  • Pitch of 5.08mm
  • Conductor outlet direction of 90°
  • Wire connection cross section from AWG 28 to AWG 14
  • CSA and UL 1059 approved, IEC listed
  • Dimmensions for L1 from 5.08mm to 35.56mm depending on the number of poles required
  • Rated current for minimum number of poles 17.5A (IEC) and 12A (UL)
  • Packaged in tubes
  • Operating temperature range −50°C to +120°C

The below table gives the specifications of the Weidmüller LSF-SMT 5.08/90 PCB terminal series:

Weidmüller LSF-SMT 5.08/90 Specifications Please see the relevant datasheet in the technical library for the exact specification

£0.00 Ex Tax: £0.00

Weidmüller LSF-SMT 7.50/180 Series

The LSF-SMT 7.50/180 PCB terminal series from Weidmüller's Omnimate signal range, offers a spring connection with direct push in technology. Designed with a conductor outlet direction of 180°, and a choice from 2 up to 8 poles and a 7.5mm pitch. The LSF-SMT 7.50/180 series from Weidmüller have a fully automatic assembly using reflow soldering (SMT) and can be used with or without ferrules, with an operating temperature range of −50°C to +120°C .

  • PCB terminal connector
  • Through-hole technology with reflow soldering
  • Number of poles available from 2 to 8
  • Solder pin length of 3.5mm
  • Pitch of 7.5mm
  • Conductor outlet direction of 180°
  • Wire connection cross section from AWG 28 to AWG 14
  • CSA and UL 1059 approved, IEC listed
  • Dimmensions for L1 from 7.5mm to 52.5mm depending on the number of poles required
  • Rated current for minimum number of poles 17.5A (IEC) and 12A (UL)
  • Packaged in tubes
  • Operating temperature range −50°C to +120°C

The below table gives the specifications of the Weidmüller LSF-SMT 7.50/180 PCB terminal series:

Weidmüller LSF-SMT 7.50/180 Specifications Please see the relevant datasheet in the technical library for the exact specification

£0.00 Ex Tax: £0.00

Weidmüller LSF-SMT 7.50/90 Series

The LSF-SMT 7.50/90 PCB terminal series from Weidmüller's Omnimate signal range, offers a spring connection with direct push in technology. Designed with a conductor outlet direction of 90°, and a choice from 2 up to 8 poles and a 7.5mm pitch. The LSF-SMT 7.50/90 series from Weidmüller have a fully automatic assembly using reflow soldering (SMT) and can be used with or without ferrules, with an operating temperature range of −50°C to +120°C .

  • PCB terminal connector
  • Through-hole technology with reflow soldering
  • Number of poles available from 2 to 8
  • Solder pin length of 3.5mm
  • Pitch of 7.5mm
  • Conductor outlet direction of 90°
  • Wire connection cross section from AWG 28 to AWG 14
  • CSA and UL 1059 approved, IEC listed
  • Dimmensions for L1 from 7.5mm to 52.5mm depending on the number of poles required
  • Rated current for minimum number of poles 17.5A (IEC) and 12A (UL)
  • Packaged in tubes
  • Operating temperature range −50°C to +120°C

The below table gives the specifications of the Weidmüller LSF-SMT 7.50/90 PCB terminal series:

Weidmüller LSF-SMT 7.50/90 Specifications Please see the relevant datasheet in the technical library for the exact specification

£0.00 Ex Tax: £0.00