Print Terminaler

Print Terminaler
PCB terminals are sturdy, direct connection for extreme current and voltage requirements in all power electronics applications such as solar inverters, frequency converters, servo-controllers and power supplies.

  • High-power: 150A / 1000V (IEC) or 127A / 600V (UL)
  • Application-oriented scalability: connection cross-sections from 16mm² to 50mm²
  • Simple UL approval of the device up to 600V
  • Zero-maintenance steel clamp for screw connections that are resistant to vibration
Show:
Sort By:

Weidmüller LLF 7.50/90V Series

The LLF 7.50/90V PCB terminal series from Weidmüller's Omnimate power range, offers a spring connection with direct push in technology and actuator. Designed with a conductor outlet direction of 90° and a choice from 2 up to 12 poles and a 7.5mm pitch. The LLF 7.50/90V series from Weidmüller have a fully automatic assembly using wave soldering (THT) and can be used with or without ferrules, with an operating temperature range of −40°C to +120°C .

  • PCB terminal connector
  • Through-hole technology with wave soldering
  • Number of poles available from 2 to 12
  • Solder pin length of 5mm
  • Pitch of 7.5mm
  • Conductor outlet direction of 90°
  • Push in technology with actuator
  • Wire connection cross section from AWG 24 to AWG 8
  • CSA and UL 1059 approved, IEC listed
  • Dimmensions for L1 from 7.5mm to 82.5mm depending on the number of poles required
  • Rated current for minimum number of poles 41A (IEC) and 35A (UL)
  • Black in colour (additional colours available on request)
  • Packaged in box
  • Operating temperature range −40°C to +120°C

Typical applications for the LLF 7.50/90V series include:

  • Solar inverters
  • Frequency converters
  • Servo-controllers
  • Power Supplies

The below table gives the specifications of the Weidmüller LLF 7.50/90V PCB terminal series:

Weidmüller LLF 7.50/90V Specifications Please see the relevant datasheet in the technical library for the exact specification

£0.00 Ex Tax: £0.00

Weidmüller LLFS 7.50/180V Series

The LLFS 7.50/180V PCB terminal series from Weidmüller's Omnimate power range, offers a spring connection with direct push in technology. Designed with a conductor outlet direction of 180° and a choice from 2 up to 12 poles and a 7.5mm pitch. The LLFS 7.50/180V series from Weidmüller have a fully automatic assembly using wave soldering (THT) and can be used with or without ferrules, with an operating temperature range of −40°C to +120°C .

  • PCB terminal connector
  • Through-hole technology with wave soldering
  • Number of poles available from 2 to 12
  • Solder pin length of 5mm
  • Pitch of 7.5mm
  • Conductor outlet direction of 180°
  • Push in technology
  • Wire connection cross section from AWG 24 to AWG 8
  • CSA and UL 1059 approved, IEC listed
  • Dimmensions for L1 from 7.5mm to 82.5mm depending on the number of poles required
  • Rated current for minimum number of poles 41A (IEC) and 37A (UL)
  • Black in colour (additional colours available on request)
  • Packaged in box
  • Operating temperature range −40°C to +120°C

The Sturdy, direct connection for extreme current and voltage requirements in all power electronics applications for the LLFS 7.50/180V series include:

  • Solar inverters
  • Frequency converters
  • Servo-controllers
  • Power Supplies

The below table gives the specifications of the Weidmüller LLFS 7.50/180V PCB terminal series:

Weidmüller LLFS 7.50/180V Specifications Please see the relevant datasheet in the technical library for the exact specification

£0.00 Ex Tax: £0.00

Weidmüller LU 10.16/90 Series

The LU 10.16/90 PCB terminal series from Weidmüller's Omnimate power range, offers a clamping yoke screw connection. Designed with a conductor outlet direction of 90° and a choice from 2 up to 10 poles and a 10.16mm pitch. The LU 10.16/90 series from Weidmüller have a fully automatic assembly using wave soldering (THT) and can be used with or without ferrules, with an operating temperature range of −50°C to +120°C .

  • PCB terminal connector
  • Through-hole technology with wave soldering
  • Number of poles available from 2 to 10
  • Solder pin length of 4.5mm
  • Pitch of 10.16mm
  • Conductor outlet direction of 90°
  • Clamping yoke screw connection
  • Wire connection cross section from AWG 22 to AWG 8
  • CSA and UL 1059 approved, IEC listed
  • Dimmensions for L1 from 10.16mm to 91.44mm depending on the number of poles required
  • Rated current for minimum number of poles 76A (IEC) and 65A (UL)
  • Black in colour (additional colours available on request)
  • Packaged in box
  • Operating temperature range −50°C to +120°C

The below table gives the specifications of the Weidmüller LU 10.16/90 PCB terminal series:

Weidmüller LU 10.16/90 Specifications Please see the relevant datasheet in the technical library for the exact specification

£0.00 Ex Tax: £0.00

Weidmüller LUF 10.00/90V Series

The LUF 10.00/90V PCB terminal series from Weidmüller's Omnimate power range, offers a spring connection with direct push in technology and actuator. Designed with a conductor outlet direction of 90° and a choice from 2 up to 12 poles and a 10mm pitch. The LLF 10.00/90V series from Weidmüller have a fully automatic assembly using wave soldering (THT) and can be used with or without ferrules, with an operating temperature range of −40°C to +120°C .

  • PCB terminal connector
  • Through-hole technology with wave soldering
  • Number of poles available from 2 to 12
  • Solder pin length of 5mm
  • Pitch of 10mm
  • Conductor outlet direction of 90°
  • Push in technology with actuator
  • Wire connection cross section from AWG 18 to AWG 6
  • CSA and UL 1059 approved, IEC listed
  • Dimmensions for L1 from 10mm to 110mm depending on the number of poles required
  • Rated current for minimum number of poles 76A (IEC) and 58A (UL)
  • Black in colour (additional colours available on request)
  • Packaged in box
  • Operating temperature range −40°C to +120°C

The below table gives the specifications of the Weidmüller LUF 10.00/90V PCB terminal series:

Weidmüller LUF 10.00/90V Specifications Please see the relevant datasheet in the technical library for the exact specification

£0.00 Ex Tax: £0.00

Weidmüller LUF 15.00/90V Series

The LUF 15.00/90V PCB terminal series from Weidmüller's Omnimate power range, offers a spring connection with direct push in technology and actuator. Designed with a conductor outlet direction of 90° and a choice from 2 up to 8 poles and a 15mm pitch. The LUF 15.00/90V series from Weidmüller have a fully automatic assembly using wave soldering (THT) and can be used with or without ferrules, with an operating temperature range of −40°C to +120°C .

  • PCB terminal connector
  • Through-hole technology with wave soldering
  • Number of poles available from 2 to 8
  • Solder pin length of 5mm
  • Pitch of 15mm
  • Conductor outlet direction of 90°
  • Push in technology with actuator
  • Wire connection cross section from AWG 18 to AWG 4
  • CSA and UL 1059 approved, IEC listed
  • Dimmensions for L1 from 15mm to 105mm depending on the number of poles required
  • Rated current for minimum number of poles 68A (IEC) and 58A (UL)
  • Black in colour (additional colours available on request)
  • Packaged in box
  • Operating temperature range −40°C to +120°C

The Study, direct connections for extreme current and voltage requirements in all power applications for the LLFS 15.00/90V series include:

  • Solar inverters
  • Frequency converters
  • Servo-controllers
  • Power Supplies

The below table gives the specifications of the Weidmüller LUF 10.00/90V PCB terminal series:

Weidmüller LUF 15.00/90V Specifications Please see the relevant datasheet in the technical library for the exact specification

£0.00 Ex Tax: £0.00

Weidmüller LUFS 10.00/180V Series

The LUFS 10.00/180V PCB terminal series from Weidmüller's Omnimate power range, offers a spring connection with direct push in technology. Designed with a conductor outlet direction of 180° and a choice from 2 up to 12 poles and a 10mm pitch. The LUFS 10.00/180V series from Weidmüller have a fully automatic assembly using wave soldering (THT) and can be used with or without ferrules, with an operating temperature range of −40°C to +120°C .

  • PCB terminal connector
  • Through-hole technology with wave soldering
  • Number of poles available from 2 to 12
  • Solder pin length of 5mm
  • Pitch of 10mm
  • Conductor outlet direction of 180°
  • Push in technology
  • Integrated test point for PS2.0 test plug
  • Wire connection cross section from AWG 18 to AWG 4
  • CSA and UL 1059 approved, IEC listed
  • Dimmensions for L1 from 10mm to 110mm depending on the number of poles required
  • Rated current for minimum number of poles 76A (IEC) and 57A (UL)
  • Black in colour (additional colours available on request)
  • Packaged in box
  • Operating temperature range −40°C to +120°C

The Sturdy, direct connection for extreme current and voltage requirements in all power electronics applications for the LUFS 10.00/180V series include:

  • Solar inverters
  • Frequency converters
  • Servo-controllers
  • Power supplies

The below table gives the specifications of the Weidmüller LUF 10.00/180V PCB terminal series:

Weidmüller LUFS 10.00/180V Specifications Please see the relevant datasheet in the technical library for the exact specification

£0.00 Ex Tax: £0.00

Weidmüller LUFS 15.00/180V Series

The LUFS 15.00/180V PCB terminal series from Weidmüller's Omnimate power range, offers a spring connection with direct push in technology. Designed with a conductor outlet direction of 180° and a choice from 2 up to 8 poles and a 15mm pitch. The LUFS 15.00/180V series from Weidmüller have a fully automatic assembly using wave soldering (THT) and can be used with or without ferrules, with an operating temperature range of −40°C to +120°C .

  • PCB terminal connector
  • Through-hole technology with wave soldering
  • Number of poles available from 2 to 8
  • Solder pin length of 5mm
  • Pitch of 15mm
  • Conductor outlet direction of 180°
  • Push in technology without actuator
  • Wire connection cross section from AWG 18 to AWG 4
  • CSA and UL 1059 approved, IEC listed
  • Dimmensions for L1 from 15mm to 105mm depending on the number of poles required
  • Rated current for minimum number of poles 76A (IEC) and 57A (UL)
  • Black in colour (additional colours available on request)
  • Packaged in box
  • Operating temperature range −40°C to +120°C

The Sturdy, direct connection for extreme current and voltage requirements in all power electronics applications for the LUFS 15.00/180V series include:

  • Solar inverters
  • Frequency converters
  • Servo-controllers
  • Power supplies

The below table gives the specifications of the Weidmüller LUFS 15.00/180V PCB terminal series:

Weidmüller LUFS 15.00/180V Specifications Please see the relevant datasheet in the technical library for the exact specification

£0.00 Ex Tax: £0.00

Weidmüller LX 15.00/90 Series

The  LX 15.00/90 PCB terminal series from Weidmüller's Omnimate power range, offers a clamping yoke screw connection. Designed with a conductor outlet direction of 90° and a choice from 1 up to 9 poles and a 15mm pitch. The  LX 15.00/90 series from Weidmüller have a fully automatic assembly using wave soldering (THT) and can be used with or without ferrules, with an operating temperature range of −50°C to +120°C .

  • PCB terminal connector
  • Through-hole technology with wave soldering
  • Number of poles available from 1 to 9
  • Solder pin length of 4.5mm
  • Pitch of 15mm
  • Conductor outlet direction of 90°
  • Clamping yoke connection
  • Wire connection cross section from AWG 16 to AWG 4
  • CSA and UL 1059 approved, IEC listed
  • Dimmensions for L1 from 0mm to 135mm depending on the number of poles required
  • Rated current for minimum number of poles 101A (IEC) and 85A (UL)
  • Black in colour (additional colours available on request)
  • Packaged in box
  • Operating temperature range −50°C to +120°C

The below table gives the specifications of the Weidmüller LX 15.00/90 PCB terminal series:

Weidmüller LX 15.00/90 Specifications Please see the relevant datasheet in the technical library for the exact specification

£0.00 Ex Tax: £0.00