Print Konnektorer

Print Konnektorer

PCB plug-in connectors from the Weidmüller OMNIMATE Power range offer the pluggable connection solutions for power electronics, including modern drive technologies such as motor starters, frequency converters, servo controllers and IT networks.

  • Setting the quality and safety standards in the industry - increased safety, pluggable shield, integrated signal contacts, one-hand operation and other innovative solutions
  • From compact 4mm 29A (IEC)/20A (UL) connector to sturdy 16mm2 model handling 76A (IEC) / 54A (UL)
  • Handling high voltages of up to 1000V (IEC) / 600V (UL)
  • Modular design with endless options allowing configuration to any design application without attracting increased costs associated with customisation
  • Hybrid Power/Signal/EMC connectors available
Show:
Sort By:

Weidmüller BUZ 10.16HP/180 Series

The BUZ 10.16HP/180 high power, female PCB plug in connector series from Weidmüller's Omnimate power range has been designed with a conductor outlet direction of 180°. With a 10.16mm pitch and a choice from 2 up to 9 poles. The BUZ 10.16HP/180 series from Weidmüller have a clamping yoke screw connection with a high current rating of 78.3A (IEC) and 60A (UL approved). These connectors have an operating temperature range of −50°C up to +130°C .

  • High power female plug in connector
  • clamping yoke via screw connection
  • Number of poles available from 2 to 9
  • Clamping range from 0.2 mm² to 16 mm²
  • Wire connection cross section from AWG 22 to AWG 6
  • Pitch of 10.16mm
  • Conductor outlet direction of 180°
  • CSA and UL 1059 approved, IEC listed
  • Dimmensions for L1 from 10.16mm to 81.28mm depending on the number of poles required
  • Rated current for minimum number of poles 78.3A (IEC) and 60A (UL)
  • Black in colour (additional colours available on request)
  • Packaged in box
  • Operating temperature range −50°C up to +130°C

The below table gives the specifications of the Weidmüller BUZ 10.16HP/180 PCB connector series:

Weidmüller BUZ 10.16HP/180 Specifications Please see the relevant datasheet in the technical library for the exact specification

£0.00 Ex Tax: £0.00

Weidmüller BVF 7.62HP/180 Series

The BVF 7.62HP/180 high power, female PCB plug in connector series from Weidmüller's Omnimate power range has been designed with a conductor outlet direction of 180°. With a 7.62mm pitch and a choice from 2 up to 7 poles. The BVF 7.62HP/180 series from Weidmüller have a push in plug in connection with a high current rating of 57A (IEC) and 39A (UL approved). These connectors have an operating temperature range of −50°C up to +125°C .

  • High power female plug in connector
  • clamping yoke screw connection
  • Number of poles available from 2 to 7
  • Clamping range from 0.5 mm² to 10 mm²
  • Wire connection cross section from AWG 24 to AWG 8
  • Pitch of 7.62mm
  • Conductor outlet direction of 180°
  • CSA and UL 1059 approved, IEC listed
  • Dimmensions for L1 from 7.62mm to 45.62mm depending on the number of poles required
  • Rated current for minimum number of poles 78.3A (IEC) and 60A (UL)
  • Black in colour (additional colours available on request)
  • Packaged in box
  • Operating temperature range −50°C up to +125°C

The below table gives the specifications of the Weidmüller BVF 7.62HP/180 PCB connector series:

Weidmüller BVF 7.62HP/180 Specifications Please see the relevant datasheet in the technical library for the exact specification

£0.00 Ex Tax: £0.00

Weidmüller SU 10.16HP/180G Series

The SU 10.16HP/180G high current, male header PCB plug in connector series from Weidmüller's Omnimate power range, has been designed with a conductor outlet direction of 180°. They have a 10.16mm pitch and a choice from 2 up to 9 poles. The SU 10.16HP/180G series from Weidmüller with a high current rating of 78.3A (IEC) and 60A (UL approved), closed housing and are suitable for wave (THT) soldering. These PCB plug-in connectors have an operating temperature range of −50°C up to +120°C .

  • High current PCB plug in connector with male header
  • Through-hole technology suitable for wave soldering
  • Number of poles available from 2 to 9
  • Solder pin length of 3.5mm
  • Pitch of 10.16mm
  • Conductor outlet direction of 180°
  • CSA and UL 1059 approved, IEC listed
  • Dimmensions for L1 from 10.16mm to 81.28mm depending on the number of poles required
  • Rated current for minimum number of poles 78.3A (IEC) and 60A (UL approved)
  • Black in colour (additional colours available on request)
  • Packaged in box
  • Operating temperature range −50°C up to +120°C

The below table gives the specifications of the Weidmüller SL-SMT 3.50/180G PCB connector series:

Weidmüller SU 10.16HP/180G Specifications Please see the relevant datasheet in the technical library for the exact specification

£0.00 Ex Tax: £0.00

Weidmüller SU 10.16HP/90G Series

The SU 10.16HP/90G high current, male header PCB plug in connector series from Weidmüller's Omnimate power range, has been designed with a conductor outlet direction of 90°. They have a 10.16mm pitch and a choice from 2 up to 9 poles. The SU 10.16HP/90G series from Weidmüller with a high current rating of 78.3A (IEC) and 60A (UL approved), closed housing and are suitable for wave (THT) soldering. These PCB plug-in connectors have an operating temperature range of −50°C up to +120°C .

  • High current PCB plug in connector with male header
  • Through-hole technology suitable for wave soldering
  • Number of poles available from 2 to 9
  • Solder pin length of 3.5mm
  • Pitch of 10.16mm
  • Conductor outlet direction of 90°
  • CSA and UL 1059 approved, IEC listed
  • Dimmensions for L1 from 10.16mm to 81.28mm depending on the number of poles required
  • Rated current for minimum number of poles 78.3A (IEC) and 60A (UL approved)
  • Black in colour (additional colours available on request)
  • Packaged in box
  • Operating temperature range −50°C up to +120°C

The below table gives the specifications of the Weidmüller SL-SMT 3.50/90G PCB connector series:

Weidmüller SU 10.16HP/90G Specifications Please see the relevant datasheet in the technical library for the exact specification

£0.00 Ex Tax: £0.00

Weidmüller SV 7.62HP/180G Series

The SV 7.62HP/180G high power, male header PCB plug in connector series from Weidmüller's Omnimate power range, has been designed with a conductor outlet direction of 180°. They have a 7.62mm pitch and a choice from 2 up to 12 poles. The SV 7.62HP/1800G series from Weidmüller with a high power rating of 57A (IEC) and 40.5A (UL approved), closed housing and are suitable for wave (THT) soldering. These PCB plug-in connectors have an operating temperature range of −50°C up to +130°C .

  • High power PCB plug in connector with male header
  • Through-hole technology suitable for wave soldering
  • Number of poles available from 2 to 12
  • Solder pin length of 3.5mm
  • Pitch of 7.62mm
  • Conductor outlet direction of 180°
  • CSA and UL 1059 approved, IEC listed
  • Dimmensions for L1 from 7.62mm to 83.82mm depending on the number of poles required
  • Rated current for minimum number of poles 57A (IEC) and 40.5A (UL approved)
  • Black in colour (additional colours available on request)
  • Packaged in box
  • Operating temperature range −50°C up to +130°C

The below table gives the specifications of the Weidmüller SL-SMT 3.50/180G PCB connector series:

Weidmüller SV 7.62HP/180G Specifications * Poles 2 to 9 ±0.1mm and poles 10 to 12 ±0.15mm
Please see the relevant datasheet in the technical library for the exact specification

£0.00 Ex Tax: £0.00

Weidmüller SV 7.62HP/90G Series

The SV 7.62HP/90G high power, male header PCB plug in connector series from Weidmüller's Omnimate power range, has been designed with a conductor outlet direction of 90°. They have a 7.62mm pitch and a choice from 2 up to 12 poles. The SV 7.62HP/90G series from Weidmüller with a high power rating of 57A (IEC) and 40.5A (UL approved), closed housing and are suitable for wave (THT) soldering. These PCB plug-in connectors have an operating temperature range of −30°C up to +130°C .

  • High power PCB plug in connector with male header
  • Through-hole technology suitable for wave soldering
  • Number of poles available from 2 to 12
  • Solder pin length of 3.5mm
  • Pitch of 7.62mm
  • Conductor outlet direction of 90°
  • CSA and UL 1059 approved, IEC listed
  • Dimmensions for L1 from 7.62mm to 83.82mm depending on the number of poles required
  • Rated current for minimum number of poles 57A (IEC) and 40.5A (UL approved)
  • Black in colour (additional colours available on request)
  • Packaged in box
  • Operating temperature range −30°C up to +130°C

The below table gives the specifications of the Weidmüller SV 7.62HP/90G PCB connector series:

Weidmüller SV 7.62HP/90G Specifications Please see the relevant datasheet in the technical library for the exact specification

£0.00 Ex Tax: £0.00