Militær og Aerospace

Militær og Aerospace

Our range for Military and Aerospace industries includes:

  • Selection of 'EEE' approved surface-mount current sensing resistors by Isabellenhütte and ultra-precision resistors from Vishay Foil Resistors
  • Selection of Military grade surface mount, high voltage chip resistors from Ohmcraft
  • 'EEE' approved pressure sensors from Emerson PaineTM
  • Robust and accurate general purpose load cells from Lord Sensing Stellar Technology
  • Thermocouple foil temperature sensors by RdF
Show:
Sort By:

Emerson Paine™ 212-35-070 series

Emerson's Paine™ 212-35-070 miniature satellite and space pressure transmitter series is designed with Class 'S', QML-V / ELDRS free electronics to meet EEE INST-002/ MSFCSTD- 3012 Level 1 standards. This transmitter series from Emerson offers a pressure range of 0 - 5,000 PSIA and provides reliable measurement in mission critical applications. This high-performance transmitter features low mass of 75 grams, radiation hardening to 100KRad (Si) total dose and accuracy of ±1.5% full scale. Applications include fuel tank pressure and thrust-er propellant pressure.

  • Miniature satellite and space pressure transmitter
  • Pressure range of 0 - 5,000 PSIA
  • All welded stainless steel construction
  • Input voltage options of ±12 - 15VDC (power rating of 0.35W) or ±24 - 32VDC (power rating of 0.8W) available
  • Operating temperature range of −40°C to +60°C (part 212-35-070-01) or −40°C to +50°C (part 212-35-070-02)
  • Designed with Class 'S', QML-V / ELDRS free electronics to meet EEE INST-002/ MSFCSTD- 3012 Level 1 standards
  • Performs in orbital environments with radiation hardening/rating to 100KRad (Si) total dose
  • Output voltage of 0.1 to 5.1VDC
  • Accuracy of ±1.5% of the full scale over the calibrated temperature range
  • Features immunity to Single Event Latch up (SEL)
  • Customisation transmitter options available for fit-for-use designs
  • Process media any compatible with 15-5 PH CRES & 321 CRES

The 212-35-070 series offers an all welded stainless steel construction that provides high measurement performance, accuracy and reliability in mission critical applications.

Potential applications for the Paine™ 212-35-070 series include:

  • Fuel tank pressure monitoring
  • Thrust pressure monitoring
  • Pressure regulator systems
  • Oxygen pressure monitoring
  • Space probe servo valve controls
  • ROV maneuvering controls

Please see the pressure table below for the Paine™ 212-35-070 series, which includes details on standard products available as well as proof and burst pressure ratings:

Emerson Paine™ 212-35-070 series specifications

£0.00 Ex Tax: £0.00

Isabellenhütte SMP-PW Series

The SMP-PW surface-mount current sensing resistor series from Isabellenhütte offers SnPb tinned connections suitable for aviation and aerospace applications being ESCC 4001/027 qualified. The design for high power ratings and low internal temperature rises due to the larger pad termination sizes. The Manganin® alloy resistance element has a resistance range of 0.005Ω to 1Ω, TC of below 50ppm/K over the temperature range of +20°C to +60°C and offers excellent long term stability. The SMP-PW model offers these capabilities in a 2010 chip size.

  • 2-terminal surface-mount resistor with large solder pads
  • 0.005Ω to 1Ω resistance range available
  • Power rating 3W (at +70°C)
  • Constant current up to 24A (0.005Ω)
  • TCR of <50 ppm/K (between +20°C and +60°C)
  • Applicable temperature range -65°C to +170°C
  • Tolerance options available ±0.5% and ±1% (depending on the resistance values required)
  • 2010 chip size
  • ESCC 4001/027 qualified

Typical applications for the SMT series include:

  • Aviation and aerospace applications
  • Control systems for the automotive market
  • Current sensor for power hybrid applications
  • Frequency converters and power modules
  • Switch mode power supplies

The below table gives an overview of the specifications for Isabellenhütte SMP-PW series

Isabellenhütte SMP Specifications

* Please contact us or see ordering information tab

£0.00 Ex Tax: £0.00

Isabellenhütte SMS-PW Series

The SMS-PW surface-mount current sensing resistor series from Isabellenhütte offers SnPb tinned connections suitable for aviation and aerospace applications being ESCC 4001/027 qualified. Higher power ratings and low internal temperature rises due to the larger pad termination sizes. The Manganin® alloy resistance element has a resistance range of 0.005Ω to 1Ω TCR of below 50ppm/K over the temperature range of  +20°C and +60°C and offers excellent long term stability. The SMS-PW model offers these capabilities in a 2512 chip size.

  • 2-terminal surface-mount resistor with large solder pads
  • SnPb tinned connections
  • Suitable for 4 pad layout
  • Resistance range available 0.005Ω to 1Ω
  • Power rating 5W (at +70°C)
  • Constant current up to 25A (0.005Ω)
  • Applicable temperature range -65°C to +170°C
  • Tolerance options available ±0.5%, ±1%, ±2% and ±5% (depending on the resistance values required)
  • 2512 chip size
  • ESCC 4001/027 qualified

Typical applications for the SMS-PW series include:

  • Aviation and aerospace applications
  • Current sensor for power hybrid applications
  • Control systems for the automotive market
  • Frequency converters and power modules
  • Switch mode power supplies

The below table gives an overview of the specifications for Isabellenhütte SMS-PW series:

Isabellenhütte SMS Specifications

* Please contact us or see ordering information tab

£0.00 Ex Tax: £0.00

Isabellenhütte SMT-PW Series

The SMT-PW surface-mount current sensing resistor series from Isabellenhütte offers SnPb tinned connections suitable for aviation and aerospace applications being ESCC 4001/027 qualified. Designed for higher power ratings and low internal temperature rises due to the larger pad termination sizes. The Manganin® alloy resistance element has a resistance range of 0.004Ω to 4Ω, TCR of below 50ppm/K over the temperature range of +20°C and +60°C for resistance values of 0.010Ω or more and offers excellent long term stability. The SMT-PW model offers these capabilities in a 2817 chip size.

  • 2-terminal surface-mount resistor with large solder pads
  • SnPb tinned connections
  • Resistance range available 0.004Ω to 4Ω
  • Power rating 5W (at +105°C)
  • Constant current up to 35A (0.004Ω)
  • TCR of <50 ppm/K for values ≥0.010Ω and <100 ppm/K for values <0.010Ω (between +20°C and +60°C)
  • Applicable temperature range -55°C to +170°C
  • Tolerance options available ±0.5%, ±1%, ±2% and ±5% (depending on the resistance values required)
  • 2817 chip size
  • ESCC 4001/027 qualified

Typical applications for the SMT-PW series include:

  • Aviation and aerospace
  • Current sensor for power hybrid applications
  • Control systems for the automotive market
  • Power modules
  • Frequency converters
  • Switch mode power supplies

The below table gives an overview of the specifications for Isabellenhütte SMT-PW series:

Isabellenhütte SMT Specifications

* Please contact us or see ordering information tab

£0.00 Ex Tax: £0.00

Isabellenhütte SMV-PW Series

The SMV-PW 4-terminal surface-mount resistor series from Isabellenhütte offers SnPb tinned connections suitable for aviation and aerospace applications. Developed to be ESCC 4001/028 qualified, with a temperature range of -55°C to +140°C, with a 3W permanent power at 80°C and selective resistance values available are between 0.0033Ω and 1Ω. The SMV-PW series from Isabellenhütte offers high pulse power rating and is suitable for reflow, infrared and wave soldering.

  • 4-terminal precision resistor with 4723 chip size
  • ESCC 4001/028 qualified
  • Continuous current load up to 30A (0.0033Ω)
  • Select resistance values between 0.0033Ω and 1Ω
  • TCR value from ≤50 ppm/K for ≤0.001Ω and ≤30 ppm/K for >0.001Ω (between +20°C and +60°C)
  • High application temperature range from -55°C to +140°C
  • Tolerance ±1.0% and ±5.0% (depending on the resistance value required)
  • High pulse power rating
  • Permanent power 3W (at +80°C)
  • Reflow, infrared and wave soldering
  • SnPb tinned contacts

Typical applications for the SMV-PW series include:

  • Space
  • Military
  • Aerospace

The below table gives an overview of the specifications for the Isabellenhütte SMV-PW series:

Isabellenhütte SMV-PW Specifications

* Please contact us for available parts or see the ordering information tab

£0.00 Ex Tax: £0.00

Ohmcraft MCH0402 Series

The MCH0402 military grade high voltage chip resistor series from Ohmcraft® offers a voltage rating of 150V, power rating of 0.04W and a resistance range from 10kΩ up to 1GΩ all in a 0402 chip size package. By utilising their patented Micropen® precision printing technology, they are able to provide a superior precision, thick-film surface-mount resistor. MCH0402 resistors offer very low noise, ultra-high stability with tolerances down to ±1% (between 10kΩ and 500MΩ), TCR as low as ±50 ppm/°C (between 10kΩ and 100MΩ) and VCR down to 1 ppm/V. Ohmcraft's military SMT chip resistors have an extended TCR temperature range (-55°C to +125°C) and are stringently inspected.

  • 2-terminal military grade high voltage surface-mount resistor
  • Available in any resistance between 10kΩ and 1GΩ
  • Utilises patented Micropen® precision printing technology
  • Ultra-high stability
  • Very low noise
  • 0402 chip size
  • Tolerances as low as ±1% (between 10kΩ and 500MΩ)
  • TCR as low as ±50 ppm/°C (from +25°C up to +75°C, between 10kΩ and 100MΩ)
  • Maximum voltage rating of 150V
  • Maximum power rating of 0.04W
  • Working temperature from -55°C up to +150°C

Ohmcraft's MCH0402 ultra-high voltage surface-mount resistors are available with various terminations:

  • Solderable wraparound matte Tin (Sn99.9) on Nickel barrier (T - RoHS Compliant)
  • Solderable wraparound Tin Lead (Sn63Pb37) solder over Nickel barrier (B - Not RoHS Compliant)
  • Solderable single surface Tin (Sn99.9) on Nickel barrier (Z - RoHS Compliant)
  • Solderable single surface Tin Lead (Sn63Pb37) flip-chip (S - Not RoHS Compliant)
  • Wire-bondable Gold (Au) (G - RoHS Compliant)

Please see the MCH series datasheet under the Technical Library tab for other available chip sizes and standard products.

For custom configurations or requirements, please contact us.

The below table gives the available specifications for the MCH0402 series:

Ohmcraft MCH0402 Specifications

The continuous maximum applied voltage cannot exceed the maximum power rating and is ohmic value dependent.
Value range is case size dependent.

£0.00 Ex Tax: £0.00

Ohmcraft MCH0603 Series

The MCH0603 military grade high voltage chip resistor series from Ohmcraft® offers a voltage rating of 400V, power rating of 0.06W and a resistance range from 10kΩ up to 50GΩ all in a 0603 chip size package. By utilising their patented Micropen® precision printing technology, they are able to provide a superior precision, thick-film surface-mount resistor. MCH0603 resistors offer very low noise, ultra-high stability with tolerances down to ±0.5% (between 10kΩ and 10MΩ), TCR as low as ±50 ppm/°C (between 10kΩ and 500MΩ) and VCR down to 1 ppm/V. Ohmcraft's military SMT chip resistors have an extended TCR temperature range (-55°C to +125°C) and are stringently inspected.

  • 2-terminal military grade high voltage surface-mount resistor
  • Available in any resistance between 10kΩ and 50GΩ
  • Utilises patented Micropen® precision printing technology
  • Ultra-high stability
  • Very low noise
  • 0603 chip size
  • Tolerances as low as ±0.5% (between 10kΩ and 10MΩ)
  • TCR as low as ±50 ppm/°C (from -55°C up to +125°C, between 10kΩ and 500MΩ)
  • Maximum voltage rating of 400V
  • Maximum power rating of 0.06W
  • Working temperature from -55°C up to +150°C

Ohmcraft's MCH0603 military grade ultra-high voltage surface-mount resistors are available with the following terminations:

  • T - Solderable wraparound matte Tin (Sn99.9) on Nickel barrier (RoHS Compliant)
  • B - Solderable wraparound Tin Lead (Sn63Pb37) solder over Nickel barrier (Not RoHS Compliant)
  • Z - Solderable single surface Tin (Sn99.9) on Nickel barrier (RoHS Compliant)
  • S - Solderable single surface Tin Lead (Sn63Pb37) flip-chip (Not RoHS Compliant)
  • G - Wire-bondable Gold (Au) (RoHS Compliant)

Please see the MCH series datasheet under the Technical Library tab for other available chip sizes and standard products.

For custom configurations or requirements, please contact us.

The below table gives the available specifications for the MCH0603 series:

Ohmcraft MCH0603 Specifications

The continuous maximum applied voltage cannot exceed the maximum power rating and is ohmic value dependent.
Value range is case size dependent.

£0.00 Ex Tax: £0.00

Ohmcraft MCH0805 Series

The MCH0805 military grade high voltage chip resistor series from Ohmcraft® offers a voltage rating of 600V, power rating of 0.2W and a resistance range from 10kΩ up to 50GΩ all in a 0805 chip size package. By utilising their patented Micropen® precision printing technology, they are able to provide a superior precision, thick-film surface-mount resistor. MCH0805 resistors offer very low noise, ultra-high stability with tolerances down to ±0.5% (between 10kΩ and 10MΩ), TCR as low as ±50 ppm/°C (between 10kΩ and 500MΩ) and VCR down to 1 ppm/V. Ohmcraft's military SMT chip resistors have an extended TCR temperature range (-55°C to +125°C) and are stringently inspected.

  • 2-terminal military grade high voltage surface-mount resistor
  • Available in any resistance between 10kΩ and 50GΩ
  • Utilises patented Micropen® precision printing technology
  • Ultra-high stability
  • Very low noise
  • 0805 chip size
  • Tolerances as low as ±0.5% (between 10kΩ and 10MΩ)
  • TCR as low as ±50 ppm/°C (from -55°C up to +125°C, between 10kΩ and 500MΩ)
  • Maximum voltage rating of 600V
  • Maximum power rating of 0.2W
  • Working temperature from -55°C up to +150°C

Ohmcraft's MCH0805 military grade ultra-high voltage surface-mount resistors are available with the following terminations:

  • T - Solderable wraparound matte Tin (Sn99.9) on Nickel barrier (RoHS Compliant)
  • B - Solderable wraparound Tin Lead (Sn63Pb37) solder over Nickel barrier (Not RoHS Compliant)
  • Z - Solderable single surface Tin (Sn99.9) on Nickel barrier (RoHS Compliant)
  • S - Solderable single surface Tin Lead (Sn63Pb37) flip-chip (Not RoHS Compliant)
  • G - Wire-bondable Gold (Au) (RoHS Compliant)

Please see the MCH series datasheet under the Technical Library tab for other available chip sizes and standard products.

For custom configurations or requirements, please contact us.

The below table gives the available specifications for the MCH0805 series:

Ohmcraft MCH0805 Specifications

The continuous maximum applied voltage cannot exceed the maximum power rating and is ohmic value dependent.
Value range is case size dependent.

£0.00 Ex Tax: £0.00

Ohmcraft MCH1206 Series

The MCH1206 military grade high voltage chip resistor series from Ohmcraft® offers a voltage rating of 1.5kV, power rating of 0.33W and a resistance range from 10kΩ up to 50GΩ all in a 1206 chip size package. By utilising their patented Micropen® precision printing technology, they are able to provide a superior precision, thick-film surface-mount resistor. MCH1206 resistors offer very low noise, ultra-high stability with tolerances down to ±0.1% (between 10kΩ and 10MΩ), TCR as low as ±25 ppm/°C (between 1MΩ and 100MΩ) and VCR down to 1 ppm/V. Ohmcraft's military SMT chip resistors have an extended TCR temperature range (-55°C to +125°C) and are stringently inspected.

  • 2-terminal military grade high voltage surface-mount resistor
  • Available in any resistance between 10kΩ and 50GΩ
  • Utilises patented Micropen® precision printing technology
  • Ultra-high stability
  • Very low noise
  • 1206 chip size
  • Tolerances as low as ±0.1% (between 10kΩ and 10MΩ)
  • TCR as low as ±25 ppm/°C (from -55°C up to +125°C, between 1MΩ and 100MΩ)
  • Maximum voltage rating of 1.5kV
  • Maximum power rating of 0.33W
  • Working temperature from -55°C up to +150°C

Ohmcraft's MCH1206 military grade ultra-high voltage surface-mount resistors are available with the following terminations:

  • T - Solderable wraparound matte Tin (Sn99.9) on Nickel barrier (RoHS Compliant)
  • B - Solderable wraparound Tin Lead (Sn63Pb37) solder over Nickel barrier (Not RoHS Compliant)
  • Z - Solderable single surface Tin (Sn99.9) on Nickel barrier (RoHS Compliant)
  • S - Solderable single surface Tin Lead (Sn63Pb37) flip-chip (Not RoHS Compliant)
  • G - Wire-bondable Gold (Au) (RoHS Compliant)

Please see the MCH series datasheet under the Technical Library tab for other available chip sizes and standard products.

For custom configurations or requirements, please contact us.

The below table gives the available specifications for the MCH1206 series:

Ohmcraft MCH1206 Specifications

The continuous maximum applied voltage cannot exceed the maximum power rating and is ohmic value dependent.
Value range is case size dependent.

£0.00 Ex Tax: £0.00

Ohmcraft MCH2010 Series

The MCH2010 military grade high voltage chip resistor series from Ohmcraft® offers a voltage rating of 2kV, power rating of 1W and a resistance range from 10kΩ up to 50GΩ all in a 2010 chip size package. By utilising their patented Micropen® precision printing technology, they are able to provide a superior precision, thick-film surface-mount resistor. MCH2010 resistors offer very low noise, ultra-high stability with tolerances down to ±0.1% (between 10kΩ and 10MΩ), TCR as low as ±25 ppm/°C (between 1MΩ and 100MΩ) and VCR down to 1 ppm/V. Ohmcraft's military SMT chip resistors have an extended TCR temperature range (-55°C to +125°C) and are stringently inspected.

  • 2-terminal military grade high voltage surface-mount resistor
  • Available in any resistance between 10kΩ and 50GΩ
  • Utilises patented Micropen® precision printing technology
  • Ultra-high stability
  • Very low noise
  • 2010 chip size
  • Tolerances as low as ±0.1% (between 10kΩ and 10MΩ)
  • TCR as low as ±25 ppm/°C (from -55°C up to +125°C, between 1MΩ and 100MΩ)
  • Maximum voltage rating of 2kV
  • Maximum power rating of 1W
  • Working temperature from -55°C up to +150°C

Ohmcraft's MCH2010 military grade ultra-high voltage surface-mount resistors are available with the following terminations:

  • T - Solderable wraparound matte Tin (Sn99.9) on Nickel barrier (RoHS Compliant)
  • B - Solderable wraparound Tin Lead (Sn63Pb37) solder over Nickel barrier (Not RoHS Compliant)
  • Z - Solderable single surface Tin (Sn99.9) on Nickel barrier (RoHS Compliant)
  • S - Solderable single surface Tin Lead (Sn63Pb37) flip-chip (Not RoHS Compliant)
  • G - Wire-bondable Gold (Au) (RoHS Compliant)

Please see the MCH series datasheet under the Technical Library tab for other available chip sizes and standard products.

For custom configurations or requirements, please contact us.

The below table gives the available specifications for the MCH2010 series:

Ohmcraft MCH2010 Specifications

The continuous maximum applied voltage cannot exceed the maximum power rating and is ohmic value dependent.
Value range is case size dependent.

£0.00 Ex Tax: £0.00

Ohmcraft MCH2512 Series

The MCH2512 military grade high voltage chip resistor series from Ohmcraft® offers a voltage rating of 3kV, power rating of 2W and a resistance range from 10kΩ up to 50GΩ all in a 2512 chip size package. By utilising their patented Micropen® precision printing technology, they are able to provide a superior precision, thick-film surface-mount resistor. MCH2512 resistors offer very low noise, ultra-high stability with tolerances down to ±0.1% (between 10kΩ and 100MΩ), TCR as low as ±25 ppm/°C (between 1MΩ and 500MΩ) and VCR down to 1 ppm/V. Ohmcraft's military SMT chip resistors have an extended TCR temperature range (-55°C to +125°C) and are stringently inspected.

  • 2-terminal military grade high voltage surface-mount resistor
  • Available in any resistance between 10kΩ and 50GΩ
  • Utilises patented Micropen® precision printing technology
  • Ultra-high stability
  • Very low noise
  • 2512 chip size
  • Tolerances as low as ±0.1% (between 10kΩ and 100MΩ)
  • TCR as low as ±25 ppm/°C (from -55°C up to +125°C, between 1MΩ and 500MΩ)
  • Maximum voltage rating of 3kV
  • Maximum power rating of 2W
  • Working temperature from -55°C up to +150°C

Ohmcraft's MCH2512 military grade ultra-high voltage surface-mount resistors are available with the following terminations:

  • T - Solderable wraparound matte Tin (Sn99.9) on Nickel barrier (RoHS Compliant)
  • B - Solderable wraparound Tin Lead (Sn63Pb37) solder over Nickel barrier (Not RoHS Compliant)
  • Z - Solderable single surface Tin (Sn99.9) on Nickel barrier (RoHS Compliant)
  • S - Solderable single surface Tin Lead (Sn63Pb37) flip-chip (Not RoHS Compliant)
  • G - Wire-bondable Gold (Au) (RoHS Compliant)

Please see the MCH series datasheet under the Technical Library tab for other available chip sizes and standard products.

For custom configurations or requirements, please contact us.

The below table gives the available specifications for the MCH2512 series:

Ohmcraft MCH2512 Specifications

The continuous maximum applied voltage cannot exceed the maximum power rating and is ohmic value dependent.
Value range is case size dependent.

£0.00 Ex Tax: £0.00

Ohmcraft MCH3512 Series

The MCH3512 military grade high voltage chip resistor series from Ohmcraft® offers a voltage rating of 3.5kV, power rating of 2W and a resistance range from 10kΩ up to 50GΩ all in a 3512 chip size package. By utilising their patented Micropen® precision printing technology, they are able to provide a superior precision, thick-film surface-mount resistor. MCH3512 resistors offer very low noise, ultra-high stability with tolerances down to ±0.1% (between 10kΩ and 100MΩ), TCR as low as ±25 ppm/°C (between 1MΩ and 500MΩ) and VCR down to 1 ppm/V. Ohmcraft's military SMT chip resistors have an extended TCR temperature range (-55°C to +125°C) and are stringently inspected.

  • 2-terminal military grade high voltage surface-mount resistor
  • Available in any resistance between 10kΩ and 50GΩ
  • Utilises patented Micropen® precision printing technology
  • Ultra-high stability
  • Very low noise
  • 3512 chip size
  • Tolerances as low as ±0.1% (between 10kΩ and 100MΩ)
  • TCR as low as ±25 ppm/°C (from -55°C up to +125°C, between 1MΩ and 500MΩ)
  • Maximum voltage rating of 3.5kV
  • Maximum power rating of 2W
  • Working temperature from -55°C up to +150°C

Ohmcraft's MCH3512 military grade ultra-high voltage surface-mount resistors are available with the following terminations:

  • T - Solderable wraparound matte Tin (Sn99.9) on Nickel barrier (RoHS Compliant)
  • B - Solderable wraparound Tin Lead (Sn63Pb37) solder over Nickel barrier (Not RoHS Compliant)
  • Z - Solderable single surface Tin (Sn99.9) on Nickel barrier (RoHS Compliant)
  • S - Solderable single surface Tin Lead (Sn63Pb37) flip-chip (Not RoHS Compliant)
  • G - Wire-bondable Gold (Au) (RoHS Compliant)

Please see the MCH series datasheet under the Technical Library tab for other available chip sizes and standard products.

For custom configurations or requirements, please contact us.

The below table gives the available specifications for the MCH3512 series:

Ohmcraft MCH3512 Specifications

The continuous maximum applied voltage cannot exceed the maximum power rating and is ohmic value dependent.
Value range is case size dependent.

£0.00 Ex Tax: £0.00

Ohmcraft MCH4020 Series

The MCH4020 military grade high voltage chip resistor series from Ohmcraft® offers a voltage rating of 4kV, power rating of 2W and a resistance range from 10kΩ up to 50GΩ all in a 4020 chip size package. By utilising their patented Micropen® precision printing technology, they are able to provide a superior precision, thick-film surface-mount resistor. MCH4020 resistors offer very low noise, ultra-high stability with tolerances down to ±0.1% (between 10kΩ and 100MΩ), TCR as low as ±25 ppm/°C (between 1MΩ and 500MΩ) and VCR down to 1 ppm/V. Ohmcraft's military SMT chip resistors have an extended TCR temperature range (-55°C to +125°C) and are stringently inspected.

  • 2-terminal military grade high voltage surface-mount resistor
  • Available in any resistance between 10kΩ and 50GΩ
  • Utilises patented Micropen® precision printing technology
  • Ultra-high stability
  • Very low noise
  • 4020 chip size
  • Tolerances as low as ±0.1% (between 10kΩ and 100MΩ)
  • TCR as low as ±25 ppm/°C (from -55°C up to +125°C, between 1MΩ and 500MΩ)
  • Maximum voltage rating of 4kV
  • Maximum power rating of 2W
  • Working temperature from -55°C up to +150°C

Ohmcraft's MCH4020 military grade ultra-high voltage surface-mount resistors are available with the following terminations:

  • T - Solderable wraparound matte Tin (Sn99.9) on Nickel barrier (RoHS Compliant)
  • B - Solderable wraparound Tin Lead (Sn63Pb37) solder over Nickel barrier (Not RoHS Compliant)
  • Z - Solderable single surface Tin (Sn99.9) on Nickel barrier (RoHS Compliant)
  • S - Solderable single surface Tin Lead (Sn63Pb37) flip-chip (Not RoHS Compliant)
  • G - Wire-bondable Gold (Au) (RoHS Compliant)

Please see the MCH series datasheet under the Technical Library tab for other available chip sizes and standard products.

For custom configurations or requirements, please contact us.

The below table gives the available specifications for the MCH4020 series:

Ohmcraft MCH4020 Specifications

The continuous maximum applied voltage cannot exceed the maximum power rating and is ohmic value dependent.
Value range is case size dependent.

£0.00 Ex Tax: £0.00

Ohmcraft MCH5020 Series

The MCH5020 military grade high voltage chip resistor series from Ohmcraft® offers a voltage rating of 5kV, power rating of 2W and a resistance range from 10kΩ up to 50GΩ all in a 5020 chip size package. By utilising their patented Micropen® precision printing technology, they are able to provide a superior precision, thick-film surface-mount resistor. MCH5020 resistors offer very low noise, ultra-high stability with tolerances down to ±0.1% (between 10kΩ and 100MΩ), TCR as low as ±25 ppm/°C (between 1MΩ and 500MΩ) and VCR down to 1 ppm/V. Ohmcraft's military SMT chip resistors have an extended TCR temperature range (-55°C to +125°C) and are stringently inspected.

  • 2-terminal military grade high voltage surface-mount resistor
  • Available in any resistance between 10kΩ and 50GΩ
  • Utilises patented Micropen® precision printing technology
  • Ultra-high stability
  • Very low noise
  • 5020 chip size
  • Tolerances as low as ±0.1% (between 10kΩ and 100MΩ)
  • TCR as low as ±25 ppm/°C (from -55°C up to +125°C, between 1MΩ and 500MΩ)
  • Maximum voltage rating of 5kV
  • Maximum power rating of 2W
  • Working temperature from -55°C up to +150°C

Ohmcraft's MCH5020 military grade ultra-high voltage surface-mount resistors are available with the following terminations:

  • T - Solderable wraparound matte Tin (Sn99.9) on Nickel barrier (RoHS Compliant)
  • B - Solderable wraparound Tin Lead (Sn63Pb37) solder over Nickel barrier (Not RoHS Compliant)
  • Z - Solderable single surface Tin (Sn99.9) on Nickel barrier (RoHS Compliant)
  • S - Solderable single surface Tin Lead (Sn63Pb37) flip-chip (Not RoHS Compliant)
  • G - Wire-bondable Gold (Au) (RoHS Compliant)

Please see the MCH series datasheet under the Technical Library tab for other available chip sizes and standard products.

For custom configurations or requirements, please contact us.

The below table gives the available specifications for the MCH5020 series:

Ohmcraft MCH5020 Specifications

The continuous maximum applied voltage cannot exceed the maximum power rating and is ohmic value dependent.
Value range is case size dependent.

£0.00 Ex Tax: £0.00

RdF 20100 Series

The 20100 butt bonded foil type K (Chromel/Alumel) thermocouple temperature sensor series from RdF offer high performance and are ideal for demanding applications. These surface thermocouples provide an accuracy of ±2.2°C or ±2% with a fast response time of 0.5s (ungrounded) and 0.25s (grounded) for the sensor to reach 63.2% of a change in mounting surface temperature. This type K thermocouple offers an operating temperature range of -184°C up to +816°C. The 20100 series from RDF utilises butt bonding which produces thermocouples with no increase in thickness or mass at the junction. This offers a micro-foil® thickness of 0.0128mm (0.0005"). The sensors have a removable Kapton® frame for bare foil application.

  • Butt bonded foil thermocouple
  • Type K (Chromel/Alumel)
  • Accuracy of ±2.2°C or ±2%
  • Operating temperature range -184°C to +816°C
  • Operating current of 0.5mA
  • Micro-foil® thickness of 0.0128mm (0.0005")
  • Response time of 0.5s (ungrounded) and 0.25s (grounded) for the sensor to reach 63.2% of a change in mounting surface temperature
  • Insulation resistance of 50MΩ minimum at 50 VDC in ungrounded junction TCs
  • Lead wires are dot colour coded ribbon leads
  • Standard lead length 6", additional lengths available upon request
  • Removable Kapton® case material for bare foil applications

£0.00 Ex Tax: £0.00