General Resistance

General Resistance

Høj præcision, høj stabilitet, Wirewound-modstande

  • Axial og Radial for gennemgående print montage afhængig af model
  • TCR på 5ppm/°C maximum mellem -55°C og +125°C
  • Standard tolerance på ±0.01% og ±0.1% tilgængelig
  • Kundetilpassede modstandsværdier og RTD simulation værdier er tilgængelige

Klik her for deres officielle hjemmeside

Show:
Sort By:

General Resistance 5G10 Mini-Ohm Series

The 5G10 Mini-Ohm wirewound axial leaded through-hole resistor series from General Resistance offers ultra-precision and excellent long term stability over temperature and time, with a resistance range from 10Ω up to 200kΩ. The 5G10 Mini-Ohm series utilises the highest quality copper alloy drawn from melts of known resistivity and controlled temperature coefficients. The windings are balanced multiple π for low reactance. Together these enable the 5G10 Mini-Ohm series to have excellent noise levels and lower TCR of ±5 ppm/°C maximum (from -55°C and +125°C).

  • Wirewound axial leaded precision resistor
  • Available in any resistance between 10Ω and 200kΩ including custom values
  • Stocked in many standard resistance values here at Rhopoint Components
  • Small axial leaded through-hole package
  • Excellent stability of ±50ppm/yr
  • Noise levels so small they are immeasurable
  • Wire gauge of 24AWG (0.4mm)
  • Tight tolerance options of ±0.01% (A) and ±0.1% (D) available for the full resistance range
  • TCR of ±5 ppm/°C maximum (from -55°C and +125°C)
  • Maximum working voltage of 175V
  • Power rating of 0.2W (at +85°C, 5G10D model) and 0.125W (at +85°C, 5G10A model)
  • Maximum rated operating temperature +85°C
  • Working temperature from -55°C up to +160°C

The General Resistance ultra-precision wirewound axial leaded resistor series have been used for over 50 years in precision measurement instruments by manufacturers around the world, and should be specified whenever precision circuit operation is to be maintained over a prolonged period of time.

The 5G10 Mini-Ohm series offers ultra-precision in a small compact through-hole package, making them the ideal solution for test and measurement applications including test and calibration equipment.

Any custom resistance value can be produced with a low minimum order requirement of 10 pcs for non standard product.

The below table gives the full specifications for each resistor model available in the General Resistance wirewound resistor range including the 5G10 Mini-Ohm series:

General Resistance 5G10 Specifications

✝ The 8G24 series has been made obsolete. Some older stock may be available in some instances, please contact us for further details
* For other tolerances, please contact us
** All leads are tinned copper

£0.00 Ex Tax: £0.00

General Resistance 8G16 Econistor Series

The 8G16 Econistor wirewound axial leaded through-hole resistor series from General Resistance offers ultra-precision and excellent long term stability over temperature and time, with a resistance range from 1Ω up to 699kΩ. The 8G16 Econistor series utilises the highest quality copper alloy drawn from melts of known resistivity and controlled temperature coefficients. The windings are balanced multiple π for low reactance. Together these enable the 8G16 Econistor series to have excellent noise levels and lower TCR of ±5 ppm/°C maximum (from -55°C and +125°C).

  • Wirewound axial leaded precision resistor
  • Available in any resistance between 1Ω and 699kΩ including custom values
  • Stocked in many standard resistors and RTD simulation values here at Rhopoint Components
  • Wire gauge of 20AWG (0.6mm)
  • Excellent stability of ±35ppm/yr
  • Noise levels so small they are immeasurable
  • Tight tolerance options of ±0.01% (A) and ±0.1% (D) available for the full resistance range
  • TCR of ±5 ppm/°C maximum (from -55°C and +125°C)
  • Maximum working voltage of 200V
  • Power rating of 0.33W (at +85°C, 8G16D model) or ≈0.2W (at +85°C, 8G16A model)
  • Maximum rated operating temperature +85°C
  • Working temperature from -55°C up to +160°C

The General Resistance ultra-precision wirewound resistors have been used for over 50 years in precision measurement instruments by manufacturers around the world, and should be specified whenever precision circuit operation is to be maintained over a prolonged period of time.

The 8G16 Econistor series are the ideal solution for test and measurement applications including RTD temperature simulation resistors and test and calibration equipment. We stock 21 Pt100 simulation resistance values as standard here at Rhopoint Components, with temperatures from -100°C up to +400°C.

Any custom resistance value can be produced with a low minimum order requirement of 10 pcs for non standard product, this includes additional RTD simulation values that are not standard stocked items.

The below table gives the full specifications for each resistor model available in the General Resistance wirewound resistor range including the 8G16 Econistor series:

General Resistance 8G16 Specifications

✝ The 8G24 series has been made obsolete. Some older stock may be available in some instances, please contact us for further details
* For other tolerances, please contact us
** All leads are tinned copper

£0.00 Ex Tax: £0.00

General Resistance GG102 Squaristor Series

The GG102 Squaristor wirewound radial leaded through-hole resistor series from General Resistance offers ultra-precision and excellent long term stability over temperature and time, with a resistance range from 10Ω up to 200kΩ. The GG102 Squaristor series utilises the highest quality copper alloy drawn from melts of known resistivity and controlled temperature coefficients. The windings are balanced multiple π for low reactance. Together these enable the GG102 Squaristor series to have excellent noise levels and lower TCR of ±5 ppm/°C maximum (from -55°C and +125°C).

  • Wirewound radial leaded precision resistor
  • Available in any resistance between 10Ω and 200kΩ including custom values
  • Small radial leaded through-hole package
  • Wire gauge of 22AWG (0.6mm)
  • Excellent stability of ±35ppm/yr
  • Noise levels so small they are immeasurable
  • Tight tolerance options of ±0.01% (A) and ±0.1% (D) available for the full resistance range
  • TCR of ±5 ppm/°C maximum (from -55°C and +125°C)
  • Maximum working voltage of 150V
  • Power rating of 0.3W (at +85°C, GG102D model) and ≈0.18W (at +85°C, GG102A model)
  • Maximum rated operating temperature +85°C
  • Working temperature from -55°C up to +160°C

The General Resistance ultra-precision wirewound resistor series have been used for over 50 years in precision measurement instruments by manufacturers around the world, and should be specified whenever precision circuit operation is to be maintained over a prolonged period of time.

The GG102 Squaristor series offers ultra-precision in a small compact radial leaded through-hole package, making them the ideal solution for test and measurement applications including test and calibration equipment.

Any custom resistance value can be produced with a low minimum order requirement of 10 pcs for non standard product (30 pc minimum order quantity for standard parts).

The below table gives the full specifications for each resistor model available in the General Resistance wirewound resistor range including the GG102 Squaristor series:

General Resistance GG102 Specifications

✝ The 8G24 series has been made obsolete. Some older stock may be available in some instances, please contact us for further details
* For other tolerances, please contact us
** All leads are tinned copper

£0.00 Ex Tax: £0.00

General Resistance 5E10 Mini-Ohm Series

The 5E10 Mini-Ohm wirewound axial leaded through-hole resistor series from General Resistance offers ultra-precision and excellent long term stability over temperature and time, with a resistance range from 10Ω up to 200kΩ. The 5E10 Mini-Ohm series utilises the highest quality copper alloy drawn from melts of known resistivity and controlled temperature coefficients. The windings are balanced multiple π for low reactance. Together these enable the 5E10 Mini-Ohm series to have excellent noise levels and lower TCR of ±5 ppm/°C maximum (from -55°C and +125°C).

  • Wirewound axial leaded precision resistor
  • Available in any resistance between 10Ω and 200kΩ including custom values
  • Stocked in many standard resistance values here at Rhopoint Components
  • Small axial leaded through-hole package
  • Excellent stability of ±50ppm/yr
  • Noise levels so small they are immeasurable
  • Wire gauge of 24AWG (0.4mm)
  • Tight tolerance options of ±0.01% (A) and ±0.1% (D) available for the full resistance range
  • TCR of ±5 ppm/°C maximum (from -55°C and +125°C)
  • Maximum working voltage of 175V
  • Power rating of 0.2W (at +85°C, 5E10D model) and 0.125W (at +85°C, 5E10A model)
  • Maximum rated operating temperature +85°C
  • Working temperature from -55°C up to +160°C

The General Resistance ultra-precision wirewound axial leaded resistor series have been used for over 50 years in precision measurement instruments by manufacturers around the world, and should be specified whenever precision circuit operation is to be maintained over a prolonged period of time.

The 5E10 Mini-Ohm series offers ultra-precision in a small compact through-hole package, making them the ideal solution for test and measurement applications including test and calibration equipment.

Any custom resistance value can be produced with a low minimum order requirement of 10 pcs for non standard product (30 pc minimum order quantity for standard parts).

The below table gives the full specifications for each resistor model available in the General Resistance wirewound resistor range including the 5E10 Mini-Ohm series:

General Resistance 5E10 Specifications

✝ The 8G24 series has been made obsolete. Some older stock may be available in some instances, please contact us for further details
* For other tolerances, please contact us
** All leads are tinned copper

£0.00 Ex Tax: £0.00

General Resistance 8E16 Econistor Series

The 8E16 Econistor wirewound axial leaded through-hole resistor series from General Resistance offers ultra-precision and excellent long term stability over temperature and time, with a resistance range from 1Ω up to 699kΩ. The 8E16 Econistor series utilises the highest quality copper alloy drawn from melts of known resistivity and controlled temperature coefficients. The windings are balanced multiple π for low reactance. Together these enable the 8E16 Econistor series to have excellent noise levels and lower TCR of ±5 ppm/°C maximum (from -55°C and +125°C).

  • Wirewound axial leaded precision resistor
  • Available in any resistance between 1Ω and 699kΩ including custom values
  • Stocked in many standard resistors and RTD simulation values here at Rhopoint Components
  • Wire gauge of 20AWG (0.6mm)
  • Excellent stability of ±35ppm/yr
  • Noise levels so small they are immeasurable
  • Tight tolerance options of ±0.01% (A) and ±0.1% (D) available for the full resistance range
  • TCR of ±5 ppm/°C maximum (from -55°C and +125°C)
  • Maximum working voltage of 200V
  • Power rating of 0.33W (at +85°C, 8E16D model) or ≈0.2W (at +85°C, 8E16A model)
  • Maximum rated operating temperature +85°C
  • Working temperature from -55°C up to +160°C

The General Resistance ultra-precision wirewound resistors have been used for over 50 years in precision measurement instruments by manufacturers around the world, and should be specified whenever precision circuit operation is to be maintained over a prolonged period of time.

The 8E16 Econistor series are the ideal solution for test and measurement applications including RTD temperature simulation resistors and test and calibration equipment. We stock 21 Pt100 simulation resistance values as standard here at Rhopoint Components, with temperatures from -100°C up to +400°C.

Any custom resistance value can be produced with a low minimum order requirement of 10 pcs for non standard product, this includes additional RTD simulation values that are not standard stocked items (30 pc minimum order quantity for standard parts).

The below table gives the full specifications for each resistor model available in the General Resistance wirewound resistor range including the 8E16 Econistor series:

General Resistance 8E16 Specifications

✝ The 8G24 series has been made obsolete. Some older stock may be available in some instances, please contact us for further details
* For other tolerances, please contact us
** All leads are tinned copper

£0.00 Ex Tax: £0.00

General Resistance GR102 Squaristor Series

The GR102 Squaristor wirewound radial leaded through-hole resistor series from General Resistance offers ultra-precision and excellent long term stability over temperature and time, with a resistance range from 10Ω up to 200kΩ. The GR102 Squaristor series utilises the highest quality copper alloy drawn from melts of known resistivity and controlled temperature coefficients. The windings are balanced multiple π for low reactance. Together these enable the GR102 Squaristor series to have excellent noise levels and lower TCR of ±5 ppm/°C maximum (from -55°C and +125°C).

  • Wirewound radial leaded precision resistor
  • Available in any resistance between 10Ω and 200kΩ including custom values
  • Small radial leaded through-hole package
  • Wire gauge of 22AWG (0.6mm)
  • Excellent stability of ±35ppm/yr
  • Noise levels so small they are immeasurable
  • Tight tolerance options of ±0.01% (A) and ±0.1% (D) available for the full resistance range
  • TCR of ±5 ppm/°C maximum (from -55°C and +125°C)
  • Maximum working voltage of 150V
  • Power rating of 0.3W (at +85°C, GR102D model) and ≈0.18W (at +85°C, GR102A model)
  • Maximum rated operating temperature +85°C
  • Working temperature from -55°C up to +160°C

The General Resistance ultra-precision wirewound resistor series have been used for over 50 years in precision measurement instruments by manufacturers around the world, and should be specified whenever precision circuit operation is to be maintained over a prolonged period of time.

The GR102 Squaristor series offers ultra-precision in a small compact radial leaded through-hole package, making them the ideal solution for test and measurement applications including test and calibration equipment.

Any custom resistance value can be produced with a low minimum order requirement of 10 pcs for non standard product (30 pc minimum order quantity for standard parts).

The below table gives the full specifications for each resistor model available in the General Resistance wirewound resistor range including the GR102 Squaristor series:

General Resistance GR102 Specifications

✝ The 8G24 series has been made obsolete. Some older stock may be available in some instances, please contact us for further details
* For other tolerances, please contact us
** All leads are tinned copper

£0.00 Ex Tax: £0.00