Non Magnetic Modstande

Non Magnetic Modstande

For applications where non-magnetic resistors are essential, we can offer a wide selection of non-magnetic, high-ohmic chip resistors by SRT Resistor Technology. SRT's range covers various chip sizes, tolerances, TCRs, VCRs, bondable and high-temperature (up to 300°C) options. While the resistors can made to order in any value within the specified range and delivered in one of the industry's shortest lead times (usually 9-10 weeks), we stock the most popular values at our UK office for even faster quick delivery.

Can't find what you're looking for? Contact us, we can often offer customised solution to meet all your needs.

Show:
Sort By:

SRT CBW 0402 Series

The CBW 0402 non-magnetic bondable chip resistor series from SRT Resistor Technology offers a wide resistance range from 10Ω up to 100GΩ, power rating of 0.05W and working voltage rating of 60V, all in a small 0402 package. By utilising SRT's thick film resistor technology, they are able to offer low tolerances down to ±5.0% as well as a TCR as low as ±100 ppm/°C (between 10Ω and 100MΩ). The CBW 0402 resistor series has the bottom side completely insulated and features AgPd termination for flip chip assembly (face down, for conductive epoxy assembly) or gold termination for wire bonding (US/TC face up) as well as flip chip (face down, for conductive epoxy assembly).

  • Flip chip, bondable thick film chip resistor
  • Available in any resistance between 10Ω and 100GΩ
  • 0402 package
  • Power rating of 0.05W at +70°C
  • Working voltage rating 60V
  • Tolerances as low as ±5.0% over the resistance range of 10Ω up to 100MΩ
  • TCR as low as ±100 ppm/°C over the resistance range of 10Ω to 100MΩ
  • Operating temperature from -55°C up to +155°C
  • Non-magnetic
  • AgPd termination for flip chip assembly (face down, for conductive epoxy assembly)
  • Gold termination for wire bonding (US/TS, face up) as well as flip chip (face down, for conductive epoxy assembly)
  • No wrap-around
  • Bottom side completely insulated

Orientation in tape (face-up for wire bonding, face-down for flip chip assembly) is to be specified with order. If not specified, face-up is supplied as standard.

The CBW non-magnetic resistor series is also available with an extended high temperature range version (up to +200°C). Please see the separate CBW-HT product pages for further information.

Other sizes and custom tolerance, TCR and VCR options are available upon request. Please contact us for further information and availability.

The below table gives full specifications for each resistor model available including the CBW 0402 series:

SRT CBW Specifications

1) TCR: in ppm/K; +25°C...+125°C; TCR below standard TCR (highest value) or value >100G: +25°C...+85°C
2) VCR: typical values, all negative, not available for all TCR values
3) Continuous operating voltage (U_, Ueff): V ≤ √(P*R) or max. working voltage (the lower value)

£0.00 Ex Tax: £0.00

SRT CBW 0603 Series

The CBW 0603 non-magnetic bondable chip resistor series from SRT Resistor Technology offers a wide resistance range from 10Ω up to 100GΩ, power rating of 0.1W and working voltage rating of 150V, all in a small 0603 package. By utilising SRT's thick film resistor technology, they are able to offer low tolerances down to ±5.0% (between 10Ω and 10GΩ) as well as a TCR as low as ±50 ppm/°C (between 10Ω and 100MΩ). The CBW 0603 resistor series has the bottom side completely insulated and features AgPd termination for flip chip assembly (face-down, for conductive epoxy assembly) or gold termination for wire bonding (US/TC face up) as well as flip chip (face-down, for conductive epoxy assembly).

  • Flip chip, bondable thick film chip resistor
  • Available in any resistance between 10Ω and 100GΩ
  • 0603 package
  • Power rating of 0.1W at +70°C
  • Working voltage rating 150V
  • Tolerances as low as ±5.0% over the resistance range of 10Ω up to 10GΩ
  • TCR as low as ±50 ppm/°C over the resistance range of 10Ω to 100MΩ
  • Operating temperature from -55°C up to +155°C
  • Non-magnetic
  • AgPd termination for flip chip assembly (face-down, for conductive epoxy assembly)
  • Gold termination for wire bonding (US/TS, face up) as well as flip chip (face-down, for conductive epoxy assembly)
  • No wrap-around
  • Bottom side completely insulated

Orientation in tape (face-up for wire bonding, face-down for flip chip assembly) is to be specified with order. If not specified, face-up is supplied as standard.

The CBW non-magnetic resistor series is also available with an extended high temperature range version (up to +200°C). Please see the separate CBW-HT product pages for further information.

Other sizes and custom tolerance, TCR and VCR options are available upon request. Please contact us for further information and availability.

The below table gives full specifications for each resistor model available including the CBW 0603 series:

SRT CBW Specifications

1) TCR: in ppm/K; +25°C...+125°C; TCR below standard TCR (highest value) or value >100G: +25°C...+85°C
2) VCR: typical values, all negative, not available for all TCR values
3) Continuous operating voltage (U_, Ueff): V ≤ √(P*R) or max. working voltage (the lower value)

£0.00 Ex Tax: £0.00

SRT CBW 0805 Series

The CBW 0805 non-magnetic bondable chip resistor series from SRT Resistor Technology offers a wide resistance range from 10Ω up to 1TΩ, power rating of 0.125W and working voltage rating of 200V, all in a small 0805 package. By utilising SRT's thick film resistor technology, they are able to offer low tolerances down to ±5.0% (between 10Ω and 10GΩ) as well as a TCR as low as ±50 ppm/°C (between 10Ω and 100MΩ). The CBW 0805 resistor series has the bottom side completely insulated and features AgPd termination for flip chip assembly (face-down, for conductive epoxy assembly) or gold termination for wire bonding (US/TC face up) as well as flip chip (face-down, for conductive epoxy assembly).

  • Flip chip, bondable thick film chip resistor
  • Available in any resistance between 10Ω and 1TΩ
  • 0805 package
  • Power rating of 0.125W at +70°C
  • Working voltage rating 200V
  • Tolerances as low as ±5.0% over the resistance range of 10Ω up to 10GΩ
  • TCR as low as ±50 ppm/°C over the resistance range of 10Ω to 100MΩ
  • Operating temperature from -55°C up to +155°C
  • Non-magnetic
  • AgPd termination for flip chip assembly (face-down, for conductive epoxy assembly)
  • Gold termination for wire bonding (US/TS, face up) as well as flip chip (face-down, for conductive epoxy assembly)
  • No wrap-around
  • Bottom side completely insulated

Orientation in tape (face-up for wire bonding, face-down for flip chip assembly) is to be specified with order. If not specified, face-up is supplied as standard.

The CBW non-magnetic resistor series is also available with an extended high temperature range version (up to +200°C). Please see the separate CBW-HT product pages for further information.

Other sizes and custom tolerance, TCR and VCR options are available upon request. Please contact us for further information and availability.

The below table gives full specifications for each resistor model available including the CBW 0805 series:

SRT CBW Specifications

1) TCR: in ppm/K; +25°C...+125°C; TCR below standard TCR (highest value) or value >100G: +25°C...+85°C
2) VCR: typical values, all negative, not available for all TCR values
3) Continuous operating voltage (U_, Ueff): V ≤ √(P*R) or max. working voltage (the lower value)

£0.00 Ex Tax: £0.00

SRT CBW 1206 Series

The CBW 1206 non-magnetic bondable chip resistor series from SRT Resistor Technology offers a wide resistance range from 10Ω up to 1TΩ, power rating of 0.25W and working voltage rating of 400V, all in a small 1206 package. By utilising SRT's thick film resistor technology, they are able to offer low tolerances down to ±5.0% (between 10Ω and 100GΩ) as well as a TCR as low as ±50 ppm/°C (between 10Ω and 100MΩ). The CBW 1206 resistor series has the bottom side completely insulated and features AgPd termination for flip chip assembly (face-down, for conductive epoxy assembly) or gold termination for wire bonding (US/TC face up) as well as flip chip (face-down, for conductive epoxy assembly).

  • Flip chip, bondable thick film chip resistor
  • Available in any resistance between 10Ω and 1TΩ
  • 1206 package
  • Power rating of 0.25W at +70°C
  • Working voltage rating 400V
  • Tolerances as low as ±5.0% over the resistance range of 10Ω up to 100GΩ
  • TCR as low as ±50 ppm/°C over the resistance range of 10Ω to 100MΩ
  • Operating temperature from -55°C up to +155°C
  • Non-magnetic
  • AgPd termination for flip chip assembly (face-down, for conductive epoxy assembly)
  • Gold termination for wire bonding (US/TS, face up) as well as flip chip (face-down, for conductive epoxy assembly)
  • No wrap-around
  • Bottom side completely insulated

Orientation in tape (face-up for wire bonding, face-down for flip chip assembly) is to be specified with order. If not specified, face-up is supplied as standard.

The CBW non-magnetic resistor series is also available with an extended high temperature range version (up to +200°C). Please see the separate CBW-HT product pages for further information.

Other sizes and custom tolerance, TCR and VCR options are available upon request. Please contact us for further information and availability.

The below table gives full specifications for each resistor model available including the CBW 1206 series:

SRT CBW Specifications

1) TCR: in ppm/K; +25°C...+125°C; TCR below standard TCR (highest value) or value >100G: +25°C...+85°C
2) VCR: typical values, all negative, not available for all TCR values
3) Continuous operating voltage (U_, Ueff): V ≤ √(P*R) or max. working voltage (the lower value)

£0.00 Ex Tax: £0.00

SRT CHM 0805 Series

The CHM 0805 high ohmic non-magnetic resistor series from SRT Resistor Technology offers a wide resistance range from 100kΩ up to 1TΩ, power rating of 0.125W and voltage rating of 200V trimmed or 400V untrimmed (tolerances ≥5%), all in a small 0805 surface mount package. By utilising SRT's meander structured thick film resistor technology, these chip resistors are able to offer tolerances down to ±0.5% (between 100kΩ and 100MΩ) as well as a TCR of ±25 ppm/°C and a VCR as low as ±100 ppm/V (between 100kΩ and 100MΩ). The CHM 0805 resistor series contains no organics making them suitable for high vacuum applications and offer PtAg (platinum silver) terminations for conductive gluing and soldering.

  • Meander structured surface-mount thick film chip resistor
  • Available in any resistance between 100kΩ and 1TΩ
  • 0805 package
  • Power rating of 0.125W at +70°C
  • Voltage rating of 200V trimmed or 400V untrimmed (tolerances ≥5%)
  • Tolerances as low as ±0.5% over the resistance range of 100kΩ up to 100MΩ
  • TCR as low as ±25 ppm/°C over the resistance range of 100kΩ to 100MΩ
  • VCR as low as ±100 ppm/V over the resistance range of 100kΩ up to 100MΩ
  • Operating temperature from -55°C up to +155°C
  • Non-magnetic
  • PtAg (platinum silver) terminations for conductive gluing and soldering
  • Low temperature and voltage dependency
  • No organics

The CHM high ohmic non-magnetic resistor series is also available with an extended high temperature range version (up to +300°C). Please see the separate CHM-HT product pages for further information.

Lower tolerance, TCR and VCR options are available upon request. Please contact us for further information and availability.

The below table gives full specifications for each resistor model available including the CHM 0805 series:

SRT CHM Specifications

1) At continuous power dissipation the dimensions of solder-pads have to secure a sufficient heat removal
2) TCR: in ppm/K; +25°C...+125°C; TCR lower than standard TCR (highest value) or value >100G: +25°C...+85°C
3) VCR: typical values, all negative, not for all TCR values available

£0.00 Ex Tax: £0.00

SRT CHM 0805-HT Series

The CHM 0805-HT high temperature, high ohmic non-magnetic resistor series from SRT Resistor Technology offers the same features as the CHM 0805 range, while allowing for high temperature applications of up to 300°C. The main features comprise of a wide resistance range from 100kΩ up to 1TΩ, power rating of 0.125W and voltage rating of 200V trimmed or 400V untrimmed (tolerances ≥5%), all in a small 0805 surface mount package. By utilising SRT's meander structured thick film resistor technology, these chip resistors are able to offer tolerances down to ±2% (between 100kΩ and 100MΩ) as well as a TCR of ±25 ppm/°C and a VCR as low as ±100 ppm/V (between 100kΩ and 100MΩ). The CHM 0805-HT resistor series contains no organics making them suitable for high vacuum applications and offer PtAg (platinum silver) terminations for conductive gluing and soldering.

  • High temperature, meander structured surface-mount thick film chip resistor
  • Available in any resistance between 100kΩ and 1TΩ
  • 0805 package
  • Power rating of 0.125W at +70°C
  • Voltage rating of 200V trimmed or 400V untrimmed (tolerances ≥5%)
  • Tolerances as low as ±2% over the resistance range of 100kΩ up to 100MΩ
  • TCR as low as ±25 ppm/°C over the resistance range of 100kΩ to 100MΩ
  • VCR as low as ±100 ppm/V over the resistance range of 100kΩ up to 100MΩ
  • Operating temperature from -55°C up to +300°C
  • Non-magnetic
  • PtAg (platinum silver) terminations for conductive gluing and soldering
  • Low temperature and voltage dependency
  • No organics

Custom tolerance, TCR and VCR options are available upon request. Please contact us for further information and availability.

Please see the derating curve below for the CHx-HT, CRB-HT and CBW-HT series from 0°C to +300°C:

SRT CHM-HT Derating curve

The final measuring of the resistors takes place at room temperature (independent of TCR).

Please pay attention to the interconnection technology at high temperature applications.

Please note, the tolerance for the CHM 0805-HT series starts from ±2%, whereas the below table gives the full specifications of the standard CHM series:

SRT CHM Specifications

1) At continuous power dissipation the dimensions of solder-pads have to secure a sufficient heat removal
2) TCR: in ppm/K; +25°C...+125°C; TCR lower than standard TCR (highest value) or value >100G: +25°C...+85°C
3) VCR: typical values, all negative, not for all TCR values available

£0.00 Ex Tax: £0.00

SRT CHM 1206 Series

The CHM 1206 high ohmic non-magnetic resistor series from SRT Resistor Technology offers a wide resistance range from 100kΩ up to 1TΩ, power rating of 0.25W and voltage rating of 600V trimmed or 1000V untrimmed (tolerances ≥5%), all in a small 1206 surface mount package. By utilising SRT's meander structured thick film resistor technology, these chip resistors are able to offer tolerances down to ±0.5% (between 100kΩ and 100MΩ) as well as a TCR of ±25 ppm/°C and a VCR as low as ±50 ppm/V (between 100kΩ and 100MΩ). The CHM 1206 resistor series contains no organics making them suitable for high vacuum applications and offer PtAg (platinum silver) terminations for conductive gluing and soldering.

  • Meander structured surface-mount thick film chip resistor
  • Available in any resistance between 100kΩ and 1TΩ
  • 1206 package
  • Power rating of 0.25W at +70°C
  • Voltage rating of 600V trimmed or 1000V untrimmed (tolerances ≥5%)
  • Tolerances as low as ±0.5% over the resistance range of 100kΩ up to 100MΩ
  • TCR as low as ±25 ppm/°C over the resistance range of 100kΩ to 100MΩ
  • VCR as low as ±50 ppm/V over the resistance range of 100kΩ up to 100MΩ
  • Operating temperature from -55°C up to +155°C
  • Non-magnetic
  • PtAg (platinum silver) terminations for conductive gluing and soldering
  • Low temperature and voltage dependency
  • No organics

The CHM high ohmic non-magnetic resistor series is also available with an extended high temperature range version (up to +300°C). Please see the separate CHM-HT product pages for further information.

Lower tolerance, TCR and VCR options are available upon request. Please contact us for further information and availability.

The below table gives full specifications for each resistor model available including the CHM 1206 series:

SRT CHM Specifications

1) At continuous power dissipation the dimensions of solder-pads have to secure a sufficient heat removal
2) TCR: in ppm/K; +25°C...+125°C; TCR lower than standard TCR (highest value) or value >100G: +25°C...+85°C
3) VCR: typical values, all negative, not for all TCR values available

£0.00 Ex Tax: £0.00

SRT CHM 1206-HT Series

The CHM 1206-HT high temperature, high ohmic non-magnetic resistor series from SRT Resistor Technology offers the same features as the CHM 1206 range, while allowing for high temperature applications of up to 300°C. The main features comprise of a wide resistance range from 100kΩ up to 1TΩ, power rating of 0.25W and voltage rating of 600V trimmed or 1000V untrimmed (tolerances ≥5%), all in a small 1206 surface mount package. By utilising SRT's meander structured thick film resistor technology, these chip resistors are able to offer tolerances down to ±1% (between 100kΩ and 100MΩ) as well as a TCR of ±25 ppm/°C and a VCR as low as ±50 ppm/V (between 100kΩ and 100MΩ). The CHM 1206-HT resistor series contains no organics making them suitable for high vacuum applications and offer PtAg (platinum silver) terminations for conductive gluing and soldering.

  • High temperature, meander structured surface-mount thick film chip resistor
  • Available in any resistance between 100kΩ and 1TΩ
  • 1206 package
  • Power rating of 0.25W at +70°C
  • Voltage rating of 600V trimmed or 1000V untrimmed (tolerances ≥5%)
  • Tolerances as low as ±1% over the resistance range of 100kΩ up to 100MΩ
  • TCR as low as ±25 ppm/°C over the resistance range of 100kΩ to 100MΩ
  • VCR as low as ±100 ppm/V over the resistance range of 100kΩ up to 100MΩ
  • Operating temperature from -55°C up to +300°C
  • Non-magnetic
  • PtAg (platinum silver) terminations for conductive gluing and soldering
  • Low temperature and voltage dependency
  • No organics

Custom tolerance, TCR and VCR options are available upon request. Please contact us for further information and availability.

Please see the derating curve below for the CHx-HT, CRB-HT and CBW-HT series from 0°C to +300°C:

SRT CHM-HT Derating curve

The final measuring of the resistors takes place at room temperature (independent of TCR).

Please pay attention to the interconnection technology at high temperature applications.

Please note, the tolerance for the CHM 1206-HT starts from ±1%, whereas the below table gives full specifications of the standard CHM series:

SRT CHM Specifications

1) At continuous power dissipation the dimensions of solder-pads have to secure a sufficient heat removal
2) TCR: in ppm/K; +25°C...+125°C; TCR lower than standard TCR (highest value) or value >100G: +25°C...+85°C
3) VCR: typical values, all negative, not for all TCR values available

£0.00 Ex Tax: £0.00

SRT CHM 1210 Series

The CHM 1210 high ohmic non-magnetic resistor series from SRT Resistor Technology offers a wide resistance range from 100kΩ up to 1TΩ, power rating of 0.35W and voltage rating of 800V trimmed or 1200V untrimmed (tolerances ≥5%), all in a small 1210 surface mount package. By utilising SRT's meander structured thick film resistor technology, these chip resistors are able to offer tolerances down to ±0.5% (between 100kΩ and 100MΩ) as well as a TCR of ±25 ppm/°C (between 100kΩ and 10GΩ) and a VCR as low as ±50 ppm/V (between 100kΩ and 1GΩ). The CHM 1210 resistor series contains no organics making them suitable for high vacuum applications and offer PtAg (platinum silver) terminations for conductive gluing and soldering.

  • Meander structured surface-mount thick film chip resistor
  • Available in any resistance between 100kΩ and 1TΩ
  • 1210 package
  • Power rating of 0.35W at +70°C
  • Voltage rating of 800V trimmed or 1200V untrimmed (tolerances ≥5%)
  • Tolerances as low as ±0.5% over the resistance range of 100kΩ up to 100MΩ
  • TCR as low as ±25 ppm/°C over the resistance range of 100kΩ to 10GΩ
  • VCR as low as ±50 ppm/V over the resistance range of 100kΩ up to 1GΩ
  • Operating temperature from -55°C up to +155°C
  • Non-magnetic
  • PtAg (platinum silver) terminations for conductive gluing and soldering
  • Low temperature and voltage dependency
  • No organics

The CHM high ohmic non-magnetic resistor series is also available with an extended high temperature range version (up to +300°C). Please see the separate CHM-HT product pages for further information.

Lower tolerance, TCR and VCR options are available upon request. Please contact us for further information and availability.

The below table gives full specifications for each resistor model available including the CHM 1210 series:

SRT CHM Specifications

1) At continuous power dissipation the dimensions of solder-pads have to secure a sufficient heat removal
2) TCR: in ppm/K; +25°C...+125°C; TCR lower than standard TCR (highest value) or value >100G: +25°C...+85°C
3) VCR: typical values, all negative, not for all TCR values available

£0.00 Ex Tax: £0.00

SRT CHM 1210-HT Series

The CHM 1210-HT high temperature, high ohmic non-magnetic resistor series from SRT Resistor Technology offers the same features as the CHM 1210 range, while allowing for high temperature applications of up to 300°C. The main features comprise of a wide resistance range from 100kΩ up to 1TΩ, power rating of 0.35W and voltage rating of 800V trimmed or 1200V untrimmed (tolerances ≥5%), all in a small 1210 surface mount package. By utilising SRT's meander structured thick film resistor technology, these chip resistors are able to offer tolerances down to ±1% (between 100kΩ and 1GΩ) as well as a TCR of ±25 ppm/°C (between 100kΩ and 10GΩ) and a VCR as low as ±50 ppm/V (between 100kΩ and 1GΩ). The CHM 1210-HT resistor series contains no organics making them suitable for high vacuum applications and offer PtAg (platinum silver) terminations for conductive gluing and soldering.

  • High temperature meander structured surface-mount thick film chip resistor
  • Available in any resistance between 100kΩ and 1TΩ
  • 1210 package
  • Power rating of 0.35W at +70°C
  • Voltage rating of 800V trimmed or 1200V untrimmed (tolerances ≥5%)
  • Tolerances as low as ±1% over the resistance range of 100kΩ up to 1GΩ
  • TCR as low as ±25 ppm/°C over the resistance range of 100kΩ to 10GΩ
  • VCR as low as ±50 ppm/V over the resistance range of 100kΩ up to 1GΩ
  • Operating temperature from -55°C up to +300°C
  • Non-magnetic
  • PtAg (platinum silver) terminations for conductive gluing and soldering
  • Low temperature and voltage dependency
  • No organics

Custom tolerance, TCR and VCR options are available upon request. Please contact us for further information and availability.

Please see the derating curve below for the CHx-HT, CRB-HT and CBW-HT series from 0°C to +300°C:

SRT CHM-HT Derating curve

The final measuring of the resistors takes place at room temperature (independent of TCR).

Please pay attention to the interconnection technology at high temperature applications.

Please note, the tolerance for the CHM 1210-HT series starts from ±1%, whereas the below table gives full specifications of the standard CHM series:

SRT CHM Specifications

1) At continuous power dissipation the dimensions of solder-pads have to secure a sufficient heat removal
2) TCR: in ppm/K; +25°C...+125°C; TCR lower than standard TCR (highest value) or value >100G: +25°C...+85°C
3) VCR: typical values, all negative, not for all TCR values available

£0.00 Ex Tax: £0.00

SRT CHM 2010 Series

The CHM 2010 high ohmic non-magnetic resistor series from SRT Resistor Technology offers a wide resistance range from 100kΩ up to 1TΩ, power rating of 0.5W and voltage rating of 1500V trimmed or 2000V untrimmed (tolerances ≥5%), all in a small 2010 surface mount package. By utilising SRT's meander structured thick film resistor technology, these chip resistors are able to offer tolerances down to ±0.5% (between 100kΩ and 100MΩ) as well as a TCR of ±25 ppm/°C (between 100kΩ and 10GΩ) and a VCR as low as ±25 ppm/V (between 100kΩ and 100MΩ). The CHM 2010 resistor series contains no organics making them suitable for high vacuum applications and offer PtAg (platinum silver) terminations for conductive gluing and soldering.

  • Meander structured surface-mount thick film chip resistor
  • Available in any resistance between 100kΩ and 1TΩ
  • 2010 package
  • Power rating of 0.5W at +70°C
  • Voltage rating of 1500V trimmed or 2000V untrimmed (tolerances ≥5%)
  • Tolerances as low as ±0.5% over the resistance range of 100kΩ up to 100MΩ
  • TCR as low as ±25 ppm/°C over the resistance range of 100kΩ to 10GΩ
  • VCR as low as ±25 ppm/V over the resistance range of 100kΩ up to 100MΩ
  • Operating temperature from -55°C up to +155°C
  • Non-magnetic
  • PtAg (platinum silver) terminations for conductive gluing and soldering
  • Low temperature and voltage dependency
  • No organics

The CHM high ohmic non-magnetic resistor series is also available with an extended high temperature range version (up to +300°C). Please see the separate CHM-HT product pages for further information.

Lower tolerance, TCR and VCR options are available upon request. Please contact us for further information and availability.

The below table gives full specifications for each resistor model available including the CHM 2010 series:

SRT CHM Specifications

1) At continuous power dissipation the dimensions of solder-pads have to secure a sufficient heat removal
2) TCR: in ppm/K; +25°C...+125°C; TCR lower than standard TCR (highest value) or value >100G: +25°C...+85°C
3) VCR: typical values, all negative, not for all TCR values available

£0.00 Ex Tax: £0.00

SRT CHM 2010-HT Series

The CHM 2010-HT high temperature, high ohmic non-magnetic resistor series from SRT Resistor Technology offers the same features as the CHM 2010 range, while allowing for high temperature applications of up to 300°C. The main features comprise of a wide resistance range from 100kΩ up to 1TΩ, power rating of 0.5W and voltage rating of 1500V trimmed or 2000V untrimmed (tolerances ≥5%), all in a small 2010 surface mount package. By utilising SRT's meander structured thick film resistor technology, these chip resistors are able to offer tolerances down to ±1% (between 100kΩ and 1GΩ) as well as a TCR of ±25 ppm/°C (between 100kΩ and 10GΩ) and a VCR as low as ±25 ppm/V (between 100kΩ and 100MΩ). The CHM 2010-HT resistor series contains no organics making them suitable for high vacuum applications and offer PtAg (platinum silver) terminations for conductive gluing and soldering.

  • High temperature, meander structured surface-mount thick film chip resistor
  • Available in any resistance between 100kΩ and 1TΩ
  • 2010 package
  • Power rating of 0.5W at +70°C
  • Voltage rating of 1500V trimmed or 2000V untrimmed (tolerances ≥5%)
  • Tolerances as low as ±1% over the resistance range of 100kΩ up to 1GΩ
  • TCR as low as ±25 ppm/°C over the resistance range of 100kΩ to 10GΩ
  • VCR as low as ±25 ppm/V over the resistance range of 100kΩ up to 100MΩ
  • Operating temperature from -55°C up to +300°C
  • Non-magnetic
  • PtAg (platinum silver) terminations for conductive gluing and soldering
  • Low temperature and voltage dependency
  • No organics

Custom tolerance, TCR and VCR options are available upon request. Please contact us for further information and availability.

Please see the derating curve below for the CHx-HT, CRB-HT and CBW-HT series from 0°C to +300°C:

SRT CHM-HT Derating curve

The final measuring of the resistors takes place at room temperature (independent of TCR).

Please pay attention to the interconnection technology at high temperature applications.

Please note, the tolerance for the CHM 2010-HT series starts from ±1%, whereas the below table gives full specifications of the standard CHM series:

SRT CHM Specifications

1) At continuous power dissipation the dimensions of solder-pads have to secure a sufficient heat removal
2) TCR: in ppm/K; +25°C...+125°C; TCR lower than standard TCR (highest value) or value >100G: +25°C...+85°C
3) VCR: typical values, all negative, not for all TCR values available

£0.00 Ex Tax: £0.00

SRT CHM 2512 Series

The CHM 2512 high ohmic non-magnetic resistor series from SRT Resistor Technology offers a wide resistance range from 100kΩ up to 10TΩ, power rating of 1W and voltage rating of 2500V trimmed or 3000V untrimmed (tolerances ≥5%), all in a small 2512 surface mount package. By utilising SRT's meander structured thick film resistor technology, these chip resistors are able to offer tolerances down to ±0.5% (between 100kΩ and 100MΩ) as well as a TCR of ±25 ppm/°C (between 100kΩ and 10GΩ) and a VCR as low as ±10 ppm/V (between 100kΩ and 100MΩ). The CHM 2512 resistor series contains no organics making them suitable for high vacuum applications and offer PtAg (platinum silver) terminations for conductive gluing and soldering.

  • Meander structured surface-mount thick film chip resistor
  • Available in any resistance between 100kΩ and 10TΩ
  • 2512 package
  • Power rating of 1W at +70°C
  • Voltage rating of 2500V trimmed or 3000V untrimmed (tolerances ≥5%)
  • Tolerances as low as ±0.5% over the resistance range of 100kΩ up to 100MΩ
  • TCR as low as ±25 ppm/°C over the resistance range of 100kΩ to 10GΩ
  • VCR as low as ±10 ppm/V over the resistance range of 100kΩ up to 100MΩ
  • Operating temperature from -55°C up to +155°C
  • Non-magnetic
  • PtAg (platinum silver) terminations for conductive gluing and soldering
  • Low temperature and voltage dependency
  • No organics

The CHM high ohmic non-magnetic resistor series is also available with an extended high temperature range version (up to +300°C). Please see the separate CHM-HT product pages for further information.

Lower tolerance, TCR and VCR options are available upon request. Please contact us for further information and availability.

The below table gives full specifications for each resistor model available including the CHM 2512 series:

SRT CHM Specifications

1) At continuous power dissipation the dimensions of solder-pads have to secure a sufficient heat removal
2) TCR: in ppm/K; +25°C...+125°C; TCR lower than standard TCR (highest value) or value >100G: +25°C...+85°C
3) VCR: typical values, all negative, not for all TCR values available

£0.00 Ex Tax: £0.00

SRT CHM 2512-HT Series

The CHM 2512-HT high temperature, high ohmic non-magnetic resistor series from SRT Resistor Technology offers the same features as the CHM 2512 range, while allowing for high temperature applications of up to 300°C. The main features comprise of a wide resistance range from 100kΩ up to 10TΩ, power rating of 1W and voltage rating of 2500V trimmed or 3000V untrimmed (tolerances ≥5%), all in a small 2512 surface mount package. By utilising SRT's meander structured thick film resistor technology, these chip resistors are able to offer tolerances down to ±1% (between 100kΩ and 1GΩ) as well as a TCR of ±25 ppm/°C (between 100kΩ and 10GΩ) and a VCR as low as ±10 ppm/V (between 100kΩ and 100MΩ). The CHM 2512-HT resistor series contains no organics making them suitable for high vacuum applications and offer PtAg (platinum silver) terminations for conductive gluing and soldering.

  • High temperature meander structured surface-mount thick film chip resistor
  • Available in any resistance between 100kΩ and 10TΩ
  • 2512 package
  • Power rating of 1W at +70°C
  • Voltage rating of 2500V trimmed or 3000V untrimmed (tolerances ≥5%)
  • Tolerances as low as ±1% over the resistance range of 100kΩ up to 1GΩ
  • TCR as low as ±25 ppm/°C over the resistance range of 100kΩ to 10GΩ
  • VCR as low as ±10 ppm/V over the resistance range of 100kΩ up to 100MΩ
  • Operating temperature from -55°C up to +300°C
  • Non-magnetic
  • PtAg (platinum silver) terminations for conductive gluing and soldering
  • Low temperature and voltage dependency
  • No organics

Custom tolerance, TCR and VCR options are available upon request. Please contact us for further information and availability.

Please see the derating curve below for the CHx-HT, CRB-HT and CBW-HT series from 0°C to +300°C:

SRT CHM-HT Derating curve

The final measuring of the resistors takes place at room temperature (independent of TCR).

Please pay attention to the interconnection technology at high temperature applications.

Please note, the tolerance for the CHM 2512-HT series starts from ±1%, whereas the below table gives full specifications for the standard CHM series:

SRT CHM Specifications

1) At continuous power dissipation the dimensions of solder-pads have to secure a sufficient heat removal
2) TCR: in ppm/K; +25°C...+125°C; TCR lower than standard TCR (highest value) or value >100G: +25°C...+85°C
3) VCR: typical values, all negative, not for all TCR values available

£0.00 Ex Tax: £0.00

SRT CHM 4020 Series

The CHM 4020 high ohmic non-magnetic resistor series from SRT Resistor Technology offers a wide resistance range from 100kΩ up to 10TΩ, power rating of 1W and voltage rating of 2500V trimmed or 3000V untrimmed (tolerances ≥5%), all in a small 2512 surface mount package. By utilising SRT's meander structured thick film resistor technology, these chip resistors are able to offer tolerances down to ±0.5% (between 100kΩ and 100MΩ) as well as a TCR of ±25 ppm/°C (between 100kΩ and 10GΩ) and a VCR as low as ±10 ppm/V (between 100kΩ and 100MΩ). The CHM 2512 resistor series contains no organics making them suitable for high vacuum applications and offer PtAg (platinum silver) terminations for conductive gluing and soldering.

  • Meander structured surface-mount thick film chip resistor
  • Available in any resistance between 100kΩ and 10TΩ
  • 2512 package
  • Power rating of 1W at +70°C
  • Voltage rating of 2500V trimmed or 3000V untrimmed (tolerances ≥5%)
  • Tolerances as low as ±0.5% over the resistance range of 100kΩ up to 100MΩ
  • TCR as low as ±25 ppm/°C over the resistance range of 100kΩ to 10GΩ
  • VCR as low as ±10 ppm/V over the resistance range of 100kΩ up to 100MΩ
  • Operating temperature from -55°C up to +155°C
  • Non-magnetic
  • PtAg (platinum silver) terminations for conductive gluing and soldering
  • Low temperature and voltage dependency
  • No organics

The CHM high ohmic non-magnetic resistor series is also available with an extended high temperature range version (up to +300°C). Please see the separate CHM-HT product pages for further information.

Lower tolerance, TCR and VCR options are available upon request. Please contact us for further information and availability.

The below table gives full specifications for each resistor model available including the CHM 2512 series:

SRT CHM Specifications

1) At continuous power dissipation the dimensions of solder-pads have to secure a sufficient heat removal
2) TCR: in ppm/K; +25°C...+125°C; TCR lower than standard TCR (highest value) or value >100G: +25°C...+85°C
3) VCR: typical values, all negative, not for all TCR values available

£0.00 Ex Tax: £0.00