Højspænding

Højspænding

Browse wide range of High Voltage resistors from leading industry manufacturers at Rhopoint Nordic. Available as through-hole and surface mount options, and with a wide range of votage ratings, power ratings, tolerances and other variables, we can find the right solution for your project, however big or small.

Can't find what you're looking for? Contact us, we can often offer customised solution to meet all your needs.

Show:
Sort By:

Ohmcraft HVA05 Series

The HVA05 precision high voltage axial resistor series from Ohmcraft® offers a voltage rating of 5kV, power rating of 1W and a resistance range from 500kΩ up to 500MΩ all in a cylindrical axial leaded through-hole package. By utilising their patented Micropen® precision printing technology, they are able to provide a superior precision, non-inductive thick-film resistor. HVA resistors offer very low noise, ultra-high stability with tolerances down to ±0.1% (500kΩ to 100MΩ), TCR as low as ±50 ppm/°C and VCR down to 0.1 ppm/V.

  • Cylindrical high voltage axial leaded resistor
  • Available in any resistance between 500kΩ and 500MΩ
  • Utilises patented Micropen® precision printing technology
  • Ultra-high stability
  • Very low noise
  • Non-inductive
  • Tolerances as low as ±0.1% (between 500kΩ and 100MΩ)
  • TCR as low as ±50 ppm/°C (from +25°C up to +75°C)
  • VCR as low as ±0.1 ppm/V
  • Maximum voltage rating of 5kV
  • Maximum power rating of 1W
  • Operating temperature from -55°C up to +225°C
  • Custom configurations and sizes available upon request

Ohmcraft's HVA05 high voltage axial leaded through-hole resistor series offers a body length of 14.27mm (±0.76mm) and a diameter of 4.57mm (±0.38mm). The lead length is 38.1mm (±3.18mm) with a diameter of 0.64mm (±0.05mm).

The HVA series is produced using an Alumina substrate, coated in high-temperature silicone conformal and fitted with stainless steel end caps. The leads are solderable Gold and Nickel plated copper (RoHS compliant).

For custom configurations or requirements, please contact us.

The below table gives the specifications available for the complete HVA series including the HVA05:

Ohmcraft HVA Specifications

The continuous maximum applied voltage cannot exceed the maximum power rating and is ohmic value dependent.
Value range is case size dependent.

£0.00 Ex Tax: £0.00

Ohmcraft HVA10 Series

The HVA10 precision high voltage axial resistor series from Ohmcraft® offers a voltage rating of 15kV, power rating of 2W and a resistance range from 500kΩ up to 2GΩ all in a cylindrical axial leaded through-hole package. By utilising their patented Micropen® precision printing technology, they are able to provide a superior precision, non-inductive thick-film resistor. HVA resistors offer very low noise, ultra-high stability with tolerances down to ±0.1% (500kΩ to 100MΩ), TCR as low as ±50 ppm/°C and VCR down to 0.1 ppm/V.

  • Cylindrical high voltage axial leaded resistor
  • Available in any resistance between 500kΩ and 2GΩ
  • Utilises patented Micropen® precision printing technology
  • Ultra-high stability
  • Very low noise
  • Non-inductive
  • Tolerances as low as ±0.1% (between 500kΩ and 100MΩ)
  • TCR as low as ±50 ppm/°C (from +25°C up to +75°C)
  • VCR as low as ±0.1 ppm/V
  • Maximum voltage rating of 15kV
  • Maximum power rating of 2W
  • Operating temperature from -55°C up to +225°C
  • Custom configurations and sizes available upon request

Ohmcraft's HVA10 high voltage axial leaded through-hole resistor series offers a body length of 38.1mm (±0.76mm) and a diameter of 4.57mm (±0.38mm). The lead length is 38.1mm (±3.18mm) with a diameter of 0.64mm (±0.05mm).

The HVA series is produced using an Alumina substrate, coated in high-temperature silicone conformal and fitted with stainless steel end caps. The leads are solderable Gold and Nickel plated copper (RoHS compliant).

For custom configurations or requirements, please contact us.

The below table gives the specifications available for the complete HVA series including the HVA10:

Ohmcraft HVA Specifications

The continuous maximum applied voltage cannot exceed the maximum power rating and is ohmic value dependent.
Value range is case size dependent.

£0.00 Ex Tax: £0.00

Ohmcraft HVA18 Series

The HVA18 precision high voltage axial resistor series from Ohmcraft® offers a voltage rating of 15kV, power rating of 3.6W and a resistance range from 500kΩ up to 2GΩ all in a cylindrical axial leaded through-hole package. By utilising their patented Micropen® precision printing technology, they are able to provide a superior precision, non-inductive thick-film resistor. HVA resistors offer very low noise, ultra-high stability with tolerances down to ±0.1% (500kΩ to 100MΩ), TCR as low as ±50 ppm/°C and VCR down to 0.1 ppm/V.

  • Cylindrical high voltage axial leaded resistor
  • Available in any resistance between 500kΩ and 2GΩ
  • Utilises patented Micropen® precision printing technology
  • Ultra-high stability
  • Very low noise
  • Non-inductive
  • Tolerances as low as ±0.1% (between 500kΩ and 100MΩ)
  • TCR as low as ±50 ppm/°C (from +25°C up to +75°C)
  • VCR as low as ±0.1 ppm/V
  • Maximum voltage rating of 15kV
  • Maximum power rating of 3.6W
  • Operating temperature from -55°C up to +225°C
  • Custom configurations and sizes available upon request

Ohmcraft's HVA18 high voltage axial leaded through-hole resistor series offers a body length of 38.1mm (±0.76mm) and a diameter of 7.87mm (±0.38mm). The lead length is 38.1mm (±3.18mm) with a diameter of 1.02mm (±0.05mm).

The HVA series is produced using an Alumina substrate, coated in high-temperature silicone conformal and fitted with stainless steel end caps. The leads are solderable Gold and Nickel plated copper (RoHS compliant).

For custom configurations or requirements, please contact us.

The below table gives the specifications available for the complete HVA series including the HVA18:

Ohmcraft HVA Specifications

The continuous maximum applied voltage cannot exceed the maximum power rating and is ohmic value dependent.
Value range is case size dependent.

£0.00 Ex Tax: £0.00

Ohmcraft HVA25 Series

The HVA25 precision high voltage axial resistor series from Ohmcraft® offers a voltage rating of 20kV, power rating of 5W and a resistance range from 500kΩ up to 4GΩ all in a cylindrical axial leaded through-hole package. By utilising their patented Micropen® precision printing technology, they are able to provide a superior precision, non-inductive thick-film resistor. HVA resistors offer very low noise, ultra-high stability with tolerances down to ±0.1% (500kΩ to 100MΩ), TCR as low as ±50 ppm/°C and VCR down to 0.1 ppm/V.

  • Cylindrical high voltage axial leaded resistor
  • Available in any resistance between 500kΩ and 4GΩ
  • Utilises patented Micropen® precision printing technology
  • Ultra-high stability
  • Very low noise
  • Non-inductive
  • Tolerances as low as ±0.1% (between 500kΩ and 100MΩ)
  • TCR as low as ±50 ppm/°C (from +25°C up to +75°C)
  • VCR as low as ±0.1 ppm/V
  • Maximum voltage rating of 20kV
  • Maximum power rating of 5W
  • Operating temperature from -55°C up to +225°C
  • Custom configurations and sizes available upon request

Ohmcraft's HVA25 high voltage axial leaded through-hole resistor series offers a body length of 53.98mm (±0.76mm) and a diameter of 7.87mm (±0.38mm). The lead length is 38.1mm (±3.18mm) with a diameter of 1.02mm (±0.05mm).

The HVA series is produced using an Alumina substrate, coated in high-temperature silicone conformal and fitted with stainless steel end caps. The leads are solderable Gold and Nickel plated copper (RoHS compliant).

For custom configurations or requirements, please contact us.

The below table gives the specifications available for the complete HVA series including the HVA25:

Ohmcraft HVA Specifications

The continuous maximum applied voltage cannot exceed the maximum power rating and is ohmic value dependent.
Value range is case size dependent.

£0.00 Ex Tax: £0.00

Ohmcraft HVA38 Series

The HVA38 precision high voltage axial resistor series from Ohmcraft® offers a voltage rating of 30kV, power rating of 7.5W and a resistance range from 500kΩ up to 6GΩ all in a cylindrical axial leaded through-hole package. By utilising their patented Micropen® precision printing technology, they are able to provide a superior precision, non-inductive thick-film resistor. HVA resistors offer very low noise, ultra-high stability with tolerances down to ±0.1% (500kΩ to 100MΩ), TCR as low as ±50 ppm/°C and VCR down to 0.1 ppm/V.

  • Cylindrical high voltage axial leaded resistor
  • Available in any resistance between 500kΩ and 6GΩ
  • Utilises patented Micropen® precision printing technology
  • Ultra-high stability
  • Very low noise
  • Non-inductive
  • Tolerances as low as ±0.1% (between 500kΩ and 100MΩ)
  • TCR as low as ±50 ppm/°C (from +25°C up to +75°C)
  • VCR as low as ±0.1 ppm/V
  • Maximum voltage rating of 30kV
  • Maximum power rating of 7.5W
  • Operating temperature from -55°C up to +225°C
  • Custom configurations and sizes available upon request

Ohmcraft's HVA38 high voltage axial leaded through-hole resistor series offers a body length of 79.38mm (±0.76mm) and a diameter of 7.87mm (±0.38mm). The lead length is 38.1mm (±3.18mm) with a diameter of 1.02mm (±0.05mm).

The HVA series is produced using an Alumina substrate, coated in high-temperature silicone conformal and fitted with stainless steel end caps. The leads are solderable Gold and Nickel plated copper (RoHS compliant).

For custom configurations or requirements, please contact us.

The below table gives the specifications available for the complete HVA series including the HVA38:

Ohmcraft HVA Specifications

The continuous maximum applied voltage cannot exceed the maximum power rating and is ohmic value dependent.
Value range is case size dependent.

£0.00 Ex Tax: £0.00

Ohmcraft HVA50 Series

The HVA50 precision high voltage axial resistor series from Ohmcraft® offers a voltage rating of 50kV, power rating of 10W and a resistance range from 500kΩ up to 10GΩ all in a cylindrical axial leaded through-hole package. By utilising their patented Micropen® precision printing technology, they are able to provide a superior precision, non-inductive thick-film resistor. HVA resistors offer very low noise, ultra-high stability with tolerances down to ±0.1% (500kΩ to 100MΩ), TCR as low as ±50 ppm/°C and VCR down to 0.1 ppm/V.

  • Cylindrical high voltage axial leaded resistor
  • Available in any resistance between 500kΩ and 10GΩ
  • Utilises patented Micropen® precision printing technology
  • Ultra-high stability
  • Very low noise
  • Non-inductive
  • Tolerances as low as ±0.1% (between 500kΩ and 100MΩ)
  • TCR as low as ±50 ppm/°C (from +25°C up to +75°C)
  • VCR as low as ±0.1 ppm/V
  • Maximum voltage rating of 50kV
  • Maximum power rating of 10W
  • Operating temperature from -55°C up to +225°C
  • Custom configurations and sizes available upon request

Ohmcraft's HVA50 high voltage axial leaded through-hole resistor series offers a body length of 127.38mm (±0.76mm) and a diameter of 7.87mm (±0.38mm). The lead length is 38.1mm (±3.18mm) with a diameter of 1.02mm (±0.05mm).

The HVA series is produced using an Alumina substrate, coated in high-temperature silicone conformal and fitted with stainless steel end caps. The leads are solderable Gold and Nickel plated copper (RoHS compliant).

For custom configurations or requirements, please contact us.

The below table gives the specifications available for the complete HVA series including the HVA50:

Ohmcraft HVA Specifications

The continuous maximum applied voltage cannot exceed the maximum power rating and is ohmic value dependent.
Value range is case size dependent.

£0.00 Ex Tax: £0.00

Ohmcraft HVC0402 Series

The HVC0402 high voltage chip resistor series from Ohmcraft® offers a voltage rating of 150V, power rating of 0.04W and a resistance range from 10kΩ up to 1GΩ all in a 0402 chip size package. By utilising their patented Micropen® precision printing technology, they are able to provide a superior precision, thick-film surface-mount resistor. The HVC0402 resistors series offers very low noise, ultra-high stability with tolerances down to ±1% (between 10kΩ and 500MΩ), TCR as low as ±50 ppm/°C (between 10kΩ and 100MΩ) and VCR down to 1 ppm/V.

  • 2-terminal high voltage surface-mount resistor
  • Available in any resistance between 10kΩ and 1GΩ
  • Utilises patented Micropen® precision printing technology
  • Ultra-high stability
  • Very low noise
  • 0402 chip size
  • Tolerances as low as ±1% (between 10kΩ and 500MΩ)
  • TCR as low as ±50 ppm/°C (from +25°C up to +75°C, between 10kΩ and 100MΩ)
  • Maximum voltage rating of 150V
  • Maximum power rating of 0.04W
  • Working temperature from -55°C up to +150°C

Ohmcraft's HVC0402 ultra-high voltage surface-mount resistors are available with various terminations:

  • T - Solderable wraparound matte Tin (Sn99.9) on Nickel barrier (RoHS Compliant)
  • B - Solderable wraparound Tin Lead (Sn63Pb37) solder over Nickel barrier (Not RoHS Compliant)
  • Z - Solderable single surface Tin (Sn99.9) on Nickel barrier (RoHS Compliant)
  • S - Solderable single surface Tin Lead (Sn63Pb37) flip-chip (Not RoHS Compliant)
  • G - Wire-bondable Gold (Au) (RoHS Compliant)

Please see the HVC series datasheet under the Technical Library tab for other available chip sizes and standard products.

For custom configurations or requirements, please contact us.

The below table gives the available specifications for the HVC0402 series:

Ohmcraft HVC0402 Specifications

The continuous maximum applied voltage cannot exceed the maximum power rating and is ohmic value dependent.
Value range is case size dependent.

£0.00 Ex Tax: £0.00

Ohmcraft HVC0603 Series

The HVC0603 high voltage chip resistor series from Ohmcraft® offers a voltage rating of 400V, power rating of 0.06W and a resistance range from 10kΩ up to 50GΩ all in a 0603 chip size package. By utilising their patented Micropen® precision printing technology, they are able to provide a superior precision, thick-film surface-mount resistor. The HVC0603 resistors series offers very low noise, ultra-high stability with tolerances down to ±0.5% (between 10kΩ and 10MΩ), TCR as low as ±50 ppm/°C (between 10kΩ and 500MΩ) and VCR down to 1 ppm/V.

  • 2-terminal high voltage surface-mount resistor
  • Available in any resistance between 10kΩ and 50GΩ
  • Utilises patented Micropen® precision printing technology
  • Ultra-high stability
  • Very low noise
  • 0603 chip size
  • Tolerances as low as ±0.5% (between 10kΩ and 10MΩ)
  • TCR as low as ±50 ppm/°C (from +25°C up to +75°C, between 10kΩ and 500MΩ)
  • Maximum voltage rating of 400V
  • Maximum power rating of 0.06W
  • Working temperature from -55°C up to +150°C

Ohmcraft's HVC0603 ultra-high voltage surface-mount resistors are available with various terminations:

  • T - Solderable wraparound matte Tin (Sn99.9) on Nickel barrier (RoHS Compliant)
  • B - Solderable wraparound Tin Lead (Sn63Pb37) solder over Nickel barrier (Not RoHS Compliant)
  • Z - Solderable single surface Tin (Sn99.9) on Nickel barrier (RoHS Compliant)
  • S - Solderable single surface Tin Lead (Sn63Pb37) flip-chip (Not RoHS Compliant)
  • G - Wire-bondable Gold (Au) (RoHS Compliant)

Please see the HVC series datasheet under the Technical Library tab for other available chip sizes and standard products.

For custom configurations or requirements, please contact us.

The below table gives the available specifications for the HVC0603 series:

Ohmcraft HVC0603 Specifications

The continuous maximum applied voltage cannot exceed the maximum power rating and is ohmic value dependent.
Value range is case size dependent.

£0.00 Ex Tax: £0.00

Ohmcraft HVC0805 Series

The HVC0805 high voltage chip resistor series from Ohmcraft® offers a voltage rating of 600V, power rating of 0.2W and a resistance range from 10kΩ up to 50GΩ all in a 0805 chip size package. By utilising their patented Micropen® precision printing technology, they are able to provide a superior precision, thick-film surface-mount resistor. The HVC0805 resistors series offers very low noise, ultra-high stability with tolerances down to ±0.5% (between 10kΩ and 10MΩ), TCR as low as ±50 ppm/°C (between 10kΩ and 500MΩ) and VCR down to 1 ppm/V.

  • 2-terminal high voltage surface-mount resistor
  • Available in any resistance between 10kΩ and 50GΩ
  • Utilises patented Micropen® precision printing technology
  • Ultra-high stability
  • Very low noise
  • 0805 chip size
  • Tolerances as low as ±0.5% (between 10kΩ and 10MΩ)
  • TCR as low as ±50 ppm/°C (from +25°C up to +75°C, between 10kΩ and 500MΩ)
  • Maximum voltage rating of 600V
  • Maximum power rating of 0.2W
  • Working temperature from -55°C up to +150°C

Ohmcraft's HVC0805 ultra-high voltage surface-mount resistors are available with various terminations:

  • T - Solderable wraparound matte Tin (Sn99.9) on Nickel barrier (RoHS Compliant)
  • B - Solderable wraparound Tin Lead (Sn63Pb37) solder over Nickel barrier (Not RoHS Compliant)
  • Z - Solderable single surface Tin (Sn99.9) on Nickel barrier (RoHS Compliant)
  • S - Solderable single surface Tin Lead (Sn63Pb37) flip-chip (Not RoHS Compliant)
  • G - Wire-bondable Gold (Au) (RoHS Compliant)

Please see the HVC series datasheet under the Technical Library tab for other available chip sizes and standard products.

For custom configurations or requirements, please contact us.

The below table gives the available specifications for the HVC0805 series:

Ohmcraft HVC0805 Specifications

The continuous maximum applied voltage cannot exceed the maximum power rating and is ohmic value dependent.
Value range is case size dependent.

£0.00 Ex Tax: £0.00

Ohmcraft HVC1206 Series

The HVC1206 high voltage chip resistor series from Ohmcraft® offers a voltage rating of 1.5kV, power rating of 0.33W and a resistance range from 10kΩ up to 50GΩ all in a 1206 chip size package. By utilising their patented Micropen® precision printing technology, they are able to provide a superior precision, thick-film surface-mount resistor. The HVC1206 resistors series offers very low noise, ultra-high stability with tolerances down to ±0.1% (between 10kΩ and 10MΩ), TCR as low as ±25 ppm/°C (between 1MΩ and 10MΩ) and VCR down to 1 ppm/V.

  • 2-terminal high voltage surface-mount resistor
  • Available in any resistance between 10kΩ and 50GΩ
  • Utilises patented Micropen® precision printing technology
  • Ultra-high stability
  • Very low noise
  • 1206 chip size
  • Tolerances as low as ±0.1% (between 10kΩ and 10MΩ)
  • TCR as low as ±25 ppm/°C (from +25°C up to +75°C, between 1MΩ and 10MΩ)
  • Maximum voltage rating of 1.5kV
  • Maximum power rating of 0.33W
  • Working temperature from -55°C up to +150°C

Ohmcraft's HVC1206 ultra-high voltage surface-mount resistors are available with various terminations:

  • T - Solderable wraparound matte Tin (Sn99.9) on Nickel barrier (RoHS Compliant)
  • B - Solderable wraparound Tin Lead (Sn63Pb37) solder over Nickel barrier (Not RoHS Compliant)
  • Z - Solderable single surface Tin (Sn99.9) on Nickel barrier (RoHS Compliant)
  • S - Solderable single surface Tin Lead (Sn63Pb37) flip-chip (Not RoHS Compliant)
  • G - Wire-bondable Gold (Au) (RoHS Compliant)

Please see the HVC series datasheet under the Technical Library tab for other available chip sizes and standard products.

For custom configurations or requirements, please contact us.

The below table gives the available specifications for the HVC1206 series:

Ohmcraft HVC1206 Specifications

The continuous maximum applied voltage cannot exceed the maximum power rating and is ohmic value dependent.
Value range is case size dependent.

£0.00 Ex Tax: £0.00

Ohmcraft HVC2010 Series

The HVC2010 high voltage chip resistor series from Ohmcraft® offers a voltage rating of 2kV, power rating of 1W and a resistance range from 10kΩ up to 50GΩ all in a 2010 chip size package. By utilising their patented Micropen® precision printing technology, they are able to provide a superior precision, thick-film surface-mount resistor. The HVC2010 resistors series offers very low noise, ultra-high stability with tolerances down to ±0.1% (between 10kΩ and 10MΩ), TCR as low as ±25 ppm/°C (between 1MΩ and 10MΩ) and VCR down to 1 ppm/V.

  • 2-terminal high voltage surface-mount resistor
  • Available in any resistance between 10kΩ and 50GΩ
  • Utilises patented Micropen® precision printing technology
  • Ultra-high stability
  • Very low noise
  • 2010 chip size
  • Tolerances as low as ±0.1% (between 10kΩ and 10MΩ)
  • TCR as low as ±25 ppm/°C (from +25°C up to +75°C, between 1MΩ and 10MΩ)
  • Maximum voltage rating of 2kV
  • Maximum power rating of 1W
  • Working temperature from -55°C up to +150°C

Ohmcraft's HVC2010 ultra-high voltage surface-mount resistors are available with various terminations:

  • T - Solderable wraparound matte Tin (Sn99.9) on Nickel barrier (RoHS Compliant)
  • B - Solderable wraparound Tin Lead (Sn63Pb37) solder over Nickel barrier (Not RoHS Compliant)
  • Z - Solderable single surface Tin (Sn99.9) on Nickel barrier (RoHS Compliant)
  • S - Solderable single surface Tin Lead (Sn63Pb37) flip-chip (Not RoHS Compliant)
  • G - Wire-bondable Gold (Au) (RoHS Compliant)

Please see the HVC series datasheet under the Technical Library tab for other available chip sizes and standard products.

For custom configurations or requirements, please contact us.

The below table gives the available specifications for the HVC2010 series:

Ohmcraft HVC2010 Specifications

The continuous maximum applied voltage cannot exceed the maximum power rating and is ohmic value dependent.
Value range is case size dependent.

£0.00 Ex Tax: £0.00

Ohmcraft HVC2512 Series

The HVC2512 high voltage chip resistor series from Ohmcraft® offers a voltage rating of 3kV, power rating of 2W and a resistance range from 10kΩ up to 50GΩ all in a 2512 chip size package. By utilising their patented Micropen® precision printing technology, they are able to provide a superior precision, thick-film surface-mount resistor. The HVC2512 resistors series offers very low noise, ultra-high stability with tolerances down to ±0.1% (between 10kΩ and 100MΩ), TCR as low as ±25 ppm/°C (between 1MΩ and 100MΩ) and VCR down to 1 ppm/V.

  • 2-terminal high voltage surface-mount resistor
  • Available in any resistance between 10kΩ and 50GΩ
  • Utilises patented Micropen® precision printing technology
  • Ultra-high stability
  • Very low noise
  • 2512 chip size
  • Tolerances as low as ±0.1% (between 10kΩ and 100MΩ)
  • TCR as low as ±25 ppm/°C (from +25°C up to +75°C, between 1MΩ and 100MΩ)
  • Maximum voltage rating of 3kV
  • Maximum power rating of 2W
  • Working temperature from -55°C up to +150°C

Ohmcraft's HVC2512 ultra-high voltage surface-mount resistors are available with various terminations:

  • T - Solderable wraparound matte Tin (Sn99.9) on Nickel barrier (RoHS Compliant)
  • B - Solderable wraparound Tin Lead (Sn63Pb37) solder over Nickel barrier (Not RoHS Compliant)
  • Z - Solderable single surface Tin (Sn99.9) on Nickel barrier (RoHS Compliant)
  • S - Solderable single surface Tin Lead (Sn63Pb37) flip-chip (Not RoHS Compliant)
  • G - Wire-bondable Gold (Au) (RoHS Compliant)

Please see the HVC series datasheet under the Technical Library tab for other available chip sizes and standard products.

For custom configurations or requirements, please contact us.

The below table gives the available specifications for the HVC2512 series:

Ohmcraft HVC2512 Specifications

The continuous maximum applied voltage cannot exceed the maximum power rating and is ohmic value dependent.
Value range is case size dependent.

£0.00 Ex Tax: £0.00

Ohmcraft HVC3512 Series

The HVC3512 high voltage chip resistor series from Ohmcraft® offers a voltage rating of 3.5kV, power rating of 2W and a resistance range from 10kΩ up to 50GΩ all in a 3512 chip size package. By utilising their patented Micropen® precision printing technology, they are able to provide a superior precision, thick-film surface-mount resistor. The HVC3512 resistors series offers very low noise, ultra-high stability with tolerances down to ±0.1% (between 10kΩ and 100MΩ), TCR as low as ±25 ppm/°C (between 1MΩ and 100MΩ) and VCR down to 1 ppm/V.

  • 2-terminal high voltage surface-mount resistor
  • Available in any resistance between 10kΩ and 50GΩ
  • Utilises patented Micropen® precision printing technology
  • Ultra-high stability
  • Very low noise
  • 3512 chip size
  • Tolerances as low as ±0.1% (between 10kΩ and 100MΩ)
  • TCR as low as ±25 ppm/°C (from +25°C up to +75°C, between 1MΩ and 100MΩ)
  • Maximum voltage rating of 3.5kV
  • Maximum power rating of 2W
  • Working temperature from -55°C up to +150°C

Ohmcraft's HVC3512 ultra-high voltage surface-mount resistors are available with various terminations:

  • T - Solderable wraparound matte Tin (Sn99.9) on Nickel barrier (RoHS Compliant)
  • B - Solderable wraparound Tin Lead (Sn63Pb37) solder over Nickel barrier (Not RoHS Compliant)
  • Z - Solderable single surface Tin (Sn99.9) on Nickel barrier (RoHS Compliant)
  • S - Solderable single surface Tin Lead (Sn63Pb37) flip-chip (Not RoHS Compliant)
  • G - Wire-bondable Gold (Au) (RoHS Compliant)

Please see the HVC series datasheet under the Technical Library tab for other available chip sizes and standard products.

For custom configurations or requirements, please contact us.

The below table gives the available specifications for the HVC3512 series:

Ohmcraft HVC3512 Specifications

The continuous maximum applied voltage cannot exceed the maximum power rating and is ohmic value dependent.
Value range is case size dependent.

£0.00 Ex Tax: £0.00

Ohmcraft HVC4020 Series

The HVC4020 high voltage chip resistor series from Ohmcraft® offers a voltage rating of 4kV, power rating of 2W and a resistance range from 10kΩ up to 50GΩ all in a 4020 chip size package. By utilising their patented Micropen® precision printing technology, they are able to provide a superior precision, thick-film surface-mount resistor. The HVC4020 resistors series offers very low noise, ultra-high stability with tolerances down to ±0.1% (between 10kΩ and 100MΩ), TCR as low as ±25 ppm/°C (between 1MΩ and 100MΩ) and VCR down to 1 ppm/V.

  • 2-terminal high voltage surface-mount resistor
  • Available in any resistance between 10kΩ and 50GΩ
  • Utilises patented Micropen® precision printing technology
  • Ultra-high stability
  • Very low noise
  • 4020 chip size
  • Tolerances as low as ±0.1% (between 10kΩ and 100MΩ)
  • TCR as low as ±25 ppm/°C (from +25°C up to +75°C, between 1MΩ and 100MΩ)
  • Maximum voltage rating of 4kV
  • Maximum power rating of 2W
  • Working temperature from -55°C up to +150°C

Ohmcraft's HVC4020 ultra-high voltage surface-mount resistors are available with various terminations:

  • T - Solderable wraparound matte Tin (Sn99.9) on Nickel barrier (RoHS Compliant)
  • B - Solderable wraparound Tin Lead (Sn63Pb37) solder over Nickel barrier (Not RoHS Compliant)
  • Z - Solderable single surface Tin (Sn99.9) on Nickel barrier (RoHS Compliant)
  • S - Solderable single surface Tin Lead (Sn63Pb37) flip-chip (Not RoHS Compliant)
  • G - Wire-bondable Gold (Au) (RoHS Compliant)

Please see the HVC series datasheet under the Technical Library tab for other available chip sizes and standard products.

For custom configurations or requirements, please contact us.

The below table gives the available specifications for the HVC4020 series:

Ohmcraft HVC4020 Specifications

The continuous maximum applied voltage cannot exceed the maximum power rating and is ohmic value dependent.
Value range is case size dependent.

£0.00 Ex Tax: £0.00

Ohmcraft HVC5020 Series

The HVC5020 high voltage chip resistor series from Ohmcraft® offers a voltage rating of 5kV, power rating of 2W and a resistance range from 10kΩ up to 50GΩ all in a 5020 chip size package. By utilising their patented Micropen® precision printing technology, they are able to provide a superior precision, thick-film surface-mount resistor. The HVC5020 resistors series offers very low noise, ultra-high stability with tolerances down to ±0.1% (between 10kΩ and 100MΩ), TCR as low as ±25 ppm/°C (between 1MΩ and 100MΩ) and VCR down to 1 ppm/V.

  • 2-terminal high voltage surface-mount resistor
  • Available in any resistance between 10kΩ and 50GΩ
  • Utilises patented Micropen® precision printing technology
  • Ultra-high stability
  • Very low noise
  • 5020 chip size
  • Tolerances as low as ±0.1% (between 10kΩ and 100MΩ)
  • TCR as low as ±25 ppm/°C (from +25°C up to +75°C, between 1MΩ and 100MΩ)
  • Maximum voltage rating of 5kV
  • Maximum power rating of 2W
  • Working temperature from -55°C up to +150°C

Ohmcraft's HVC5020 ultra-high voltage surface-mount resistors are available with various terminations:

  • T - Solderable wraparound matte Tin (Sn99.9) on Nickel barrier (RoHS Compliant)
  • B - Solderable wraparound Tin Lead (Sn63Pb37) solder over Nickel barrier (Not RoHS Compliant)
  • Z - Solderable single surface Tin (Sn99.9) on Nickel barrier (RoHS Compliant)
  • S - Solderable single surface Tin Lead (Sn63Pb37) flip-chip (Not RoHS Compliant)
  • G - Wire-bondable Gold (Au) (RoHS Compliant)

Please see the HVC series datasheet under the Technical Library tab for other available chip sizes and standard products.

For custom configurations or requirements, please contact us.

The below table gives the available specifications for the HVC5020 series:

Ohmcraft HVC5020 Specifications

The continuous maximum applied voltage cannot exceed the maximum power rating and is ohmic value dependent.
Value range is case size dependent.

£0.00 Ex Tax: £0.00